MIDI-CV INTERFACE

Polyphonic MIDI-CV Interface

Based on EDV-Technik-TS MUC-810-Kit

Technical Specifications:

16 CV outputs with a resolution of 16 bits for variable control voltages such as Volt/Octave , Hz/V, Velocity , Release , Pitch Bend and Controller values.
5 Voltage ranges: 0V .. 5V, 0-10V , -2.5V .. 2.5V , 5V .. 5V, -5V .. 0V.
Furthermore, the CV outputs can also be configured for trigger , gate , or sync signals with a selectable maximum control voltage from 3 to 10V.
8 digital control outputs V-Trig 5V (10V when you remove solder bridge) for trigger , gate and sync signals.
3 MIDI ports: MIDI In, MIDI Out, MIDI Thru.
Status LED connection for the visualization of incoming MIDI data.
Short-circuit-proof driver circuit of all 24 outputs, which can provide a control current of up to 10mA. Thus, there is the possibility of multiple inputs to be wired in parallel with one of these outputs.
Big display with a display size of 4 x 20 characters for a clear representation of the configured outputs.
All parameter settings are immediately saved in a flash memory.
Spread adjustment for each CV outputs via 16 potentiometers.
Tune/offset settings via the menu control (Step size: 0, 32mV).
Power supply: 12V to 24V, 95mA current consumption.

Converter-Functions:

Up to 16 simultaneously working CV outputs that can be used for the issue of Volt /Octave , Hz/Volt , Velocitiy , release, pitch and 128 Controller values
Up to 24 trigger, gate, sync signals. The 8 digital outputs provide a level value of 5V (10V when you remove solder bridge). The 16 CV outputs can be configured with a maximum voltage level of 3V to 10V.
Free assignment of the 16 possible MIDI channels and the 128 controller values.
The pulse width of the trigger, re-trigger and sync signals can be set from 2ms to 0.5sec for each output.
Sync signals: Clock (with any prescaler), Start, Stop, Start/Stop, Stop/Start (reset sequencer).
Polyphony with up to 8 voices including velocity. Plurality of adjustable priorities regarding the selection of already active voices or notes. The maximum number of 8 voices may be split to different MIDI channels.
For the Volt/Octave function Pitch Bend and Glide can be added in different strengths.
Glide support for Controllers, Velocity, Release, Channel Pressure and Poly Pressure
Configuration of simple ADSR envelopes.
Splitting the note space into an upper and lower range for playing two synthesizers with one keyboard.
Storage of up to 4 setups.