This Module is discontinued.
8-step CV/gate sequencer
The GMS-775 Sequencer 8 can be operated as an eight step voltage sequencer with gate outputs. A clock to provide advancement to the next step in the sequence can be derived from an external clock source or an internal low frequency oscillator. A reset input allows setting the sequence to step 1.
BASIC FUNCTIONS
A three position toggle switch in each step can be set to output a gate signal for that position or reset the sequence back to the beginning. An internal jumper selects the reference voltage supplied to the step potentiometers. The three ranges are 0-+2.5 Volts, 0-+5 Volts, and 0-+10 Volts.
An additional panel toggle determines whether the sequencer is running, stopped, or reset.
The external clock input connector is a two circuit connector with the clock signal on the tip and the reset signal on the ring. This allows external controllers to start, synchronize, and step the sequence in time with an external sequence.
