Available as an assembled Module and as a DIY project.
This Module is currently available.
Noise and sample and hold
White noise output containing a broad spectrum of all frequencies
Pink noise output which contains more lower frequencies and less higher frequencies (white noise filtered by a low pass filter -3dB/octave)
Red noise output which contains even more of the lower frequencies for a nice deep rumble (pink noise filtered by a low pass filter -3dB/octave)
Blue noise is brighter than white noise with more higher frequencies than lower frequencies (white noise filtered by a high pass filter +3dB/octave)
Purple noise output is brighter still and getting quite a thin sound with mostly high frequencies only (white noise filtered by a high pass filter +6dB/octave)
Sample and hold function which can take the white noise as its input or an externally applied signal
The sample rate for the sample and hold gate can be set using the sample rate control or from an external sample rate control voltage
Supply voltage +/-15Vdc (Uses included in-line voltage regulator module with both MOTM and MU headers)
Supply current +40mA / -40mA
Input signal level +/-5V
Gate sample frequency rate 0.02Hz to over 110Hz
