Tool One

Trigger/Gate Delay, Slew Limiter, Voltage Sources and Inverters.

Trigger/Gate Delay: Derives a new trigger/gate signal from the incoming signal. The raising pulse is delayed by an amount determined by the DELAY control. The length of the output pulse depends only on the LENGHT control and not on the length of the input signal. This allows to convert a gate signal into a trigger signal and vice versa.
Slew limiter (AR envelope) with separate control for rising and falling lag.
2 Voltage sources 0V - +10V
2 inverters, can also be used to derive negative voltages from the voltage sources.
Portamento, 3 speeds
3mm face plate
Mounting depth 50mm
Dimensions: 5U double width; compatible with Moon Modular, synthesizers.com, Club of the Knobs, ...
Power requirements: +/-15V
curetronic and synthesizers.com power connector

http://curetronic.com/product/tool-one-v2/