Q963 Trigger Bus

Trigger Bus for Q960

The Q963 Trigger Bus is an aid module for the Q960 Sequential Controller. The user can manually route each trigger output from the Q960 to one of 2 bus outputs - A or B. A center position is provided to prevent the trigger from going to either output, resulting in a rest for that stage.

Connection to the Q960 is done with a 24" cable behind the panel, so the Q963 must sit near the Q960. Up to 5 Q963 modules can be daisy-chained to one Q960 Sequencer providing a total of 10 trigger buses.

https://shop.synthesizers.com/products/q963