BLM Resonator

Resonator Module running Rings firmware

MODEL: RESONATOR
HP: 12HP
DEPTH: 1 STACK PCB, SKIFF COMPATIBLE.
CURRENT:
POWER RIBBON TYPE: 10 TO 16 RIBBON CABLE

This is an updated version to the PCB layout for rings by Emilie G. This is running Rings Firmware.
This is a fully built and tested module for Euro Format Modular Cases. Power is required to get this going from your modular system.
I added a mute circuit on the output for live muting. You can patch this to an FX for example, and use the mute to do fx 'trails'.

You can download the PCB files from my website. Blue Lantern Modules, on my Survival page:
public_file-2020-resonator-rings_v2.0.zip
Download File

CC-BY-SA-3.0 Project.

Details about the build:
-Metal Knurled Shaft, 9mm pots were used.
-SOFT RUBBER KNOBS
-Large Bakelite Knob
-Twin Regulator design for STM32Fxxx, and DAC. Tantalum Capacitors used.
-Audio Grade NP Through Hole capacitor on output stage.
-OPA1678 op-amp used for output. 110db Noise Floor, 0.0001% THD
-Manufactured with Pick and Place machine and IR oven, not by hand.

https://www.bluelanternstore.com/