Multiplicity VI (2HP)

Buffered multiple

Plug a signal into input 1 and it will be available from all 6 outputs. Add a different signal into input 2 and it breaks the chain; signal 1 comes out 3 outputs and signal 2 is available at the remaining 3.

JLR's notes on module depth: I think the module depth stated may be an average since the required depth will vary with usage. (measurements based on serial #379)
* With nothing plugged into the power connector or cascade jacks the module depth is at least 35mm.
* With a power cable that doesn't have a strain relief you can stay under 35mm.
* A power cable that has a strain relief will require a depth just under 40mm.
* Using the cascade jacks with right angle cables, a case depth of at least 50mm will be needed.
* Using the cascade jacks with standard straight cables, a case depth of at least 60mm will be needed.

https://division-6.com/products/multiplicity-vi/