MOTHERFUCKER-19

analog modular synthesizer

based on the Doepfer DIY Synth kit.:
http://www.doepfer.de/DIY_Synth_e.htm

demo:

panel and wiring

https://www.dropbox.com/s/oc9l5rcrwqdgo9k/M19.zip?dl=0

https://www.facebook.com/elettrorama.it/
Product details
the moog case is excluded from the offered cost, but you can buy it separately

You have already heard of the Moog Mother 32 Synthesizer or better known as “the mother”. YokoBoko was inspired by the format of the Mother 32 and built on this basis its own Mother 32 with Doepfer and other components. The Motherfucker-19 or previous known as the Frankenstein Synthesizer is a new DIY Eurorack Synthesizer system that comes with the same format as the Moog Synthesizer.

VCO:
Sawtooth output
Rectangle output (with variable pulse width)
Four frequency CV inputs (1V/octave with tempco option)
Frequency CV summing input (can be used to increase the number of CV inputs if more than four frequency CV inputs are required)
Two PW/PWM CV inputs
PW CV summing input (can be used to increase the number of CV inputs if more than two PW CV inputs are required)
Linear FM input
Hard sync input
VCF:
Multimode filter
lowpass, highpass and bandpass output (optional low-notch-highpass with external potentiometer)
12dB/oct
Two frequency CV inputs (one roughly 1V/octave, one roughly 0.5V/octave)
Frequency CV summing input (can be used to increase the number of CV inputs if more than two frequency CV inputs are required)
Audio input
Audio summing input (can be used if more than one audio input is required)
Overdrive/distortion possible
Manual resonance control
Resonance up to self oscillation
VCA:
Exponential control scale
One CV input
CV summing input (can be used if more than one CV input is required)
Two audio inputs
Audio summing input (can be used if more than two audio inputs are required)
Overdrive/distortion possible
Audio output
ADSR:
Connection for attack, decay, sustain and release controls
Connection for range switch (3 ranges)
Connection for LED display
Gate Input
ADSR output
LFO:
Connection for frequency control
Connection for range switch (3 ranges)
Connection for LED display
Triangle and rectangle outputs
Slew Limiter:
Connection for slew control
Input
Output
Inverter
Input
Summing input (can be used to increase the number of inputs, e.g. to built an inverting mixer)
Output

https://www.flickr.com/photos/pixel_s3m/sets/72157670223814935/