Dimensions
4 HP
37 mm deep
Current Draw
25 mA +12V
0 mA -12V
0 mA 5V
Price
$65 Price in €

This Module is currently available.

r-112 Random trigs/gates

R-112 Random trigs/gates module for Eurorack / Doepfer A100 system.

From the top down:
clock (for triggers) input jack + LED
clock (for gates) input jack + LED (normalled to trig clock)
setting button + 2 LEDs (short press sets probability low/mid/high, long press sets exclusivity)
three trig out jacks + LEDs
two gate out jacks + LEDs

R-112 generates random trigs and/or gates. Gate outputs can change their state with clock only. Density of generated trigs (and changing gate output state) is set by short button press (low/mid/high density). Density is common for both trig and gate sections. Exclusivity setting sets how many trigs (and gate changes) are generated at time: 0=no exclusivity, any number of trigs (and gate changes) generated at time, 1= just one trig or just one gate state can change, 2= one of trigger and one of gate change can be generated.

There are two internal jumpers, left jumper sets trig length (jumper header set = 5ms, removed = 1ms), right jumper can convert gate outputs to trigs (labeled T4, T5), jumper header set = gates, removed = trigs.

Two clock inputs (for trig and gate sections) allows using say divided clock to decrease gate state change as example (making long gates).

Width: 4TE/ 4HP/ 20mm
Depth: 37mm /1,5″ max.
Current: 25mA
Power cable included

http://ladik.ladik.eu/?page_id=3045


Ø 5.00 (2 Votes) Average Rating
submitted Aug 7th 2020, 08:30 by tobi | last Change Aug 13th 2020, 11:40 by tobi

4 Users are observing this