Neutron MAIN PCB extension

Eurorack 1U Intellijel™ format

All the power of Behringer Neutron combined in your Eurorack system!

This is a DIY kit offering all the components to convert the "MAIN PCB" of your Neutron into a eurorack module, in 1U Intellijel™ format!
Please note,
- warning, in order to respect the dimensions of the 1U, this kit requires replacing the midi Din connector with a very pre-wired jack supplied.
- The ribbon cable between main PCB and the neutron is short, it is necessary to place the extension just above the neutron (I wish I am looking for a solution to create an extension but a component is not found :) )

A complete assembly guide can be downloaded here:
ENGLISH
FRANCAIS

The "MAIN PCB" provides:
- Independent power supply, you relieve that of your case
- On / off switch
- USB port: very important because it allows the use of the application, which gives access to many features, options, updates etc ...
- MIDI THRU port: this port transmits data received via MIDI IN
- Easy choice of MIDI channel among the traditional 16 available
- Headphone jack on 6.35mm jack and its dedicated output level control
- Line level output jack 6.35 (for mixing console, audio interface ...)
- 6.35 input jack, it allows you to process an external signal (the signal is routed to the VCF)
- Detailed screen printing on the panel
- Also available in white, red or black panel

Kit contents
- 1 "ph modular" panel in 1U Intellijel™ format
- 1 Befaco™ TRS-MIDI Type B 150 cm cable to use the Thru midi socket
- 1 stylus to facilitate access to the mini "midi channel" switch and the "boot" button
- 1 pre-wired TRS jack to replace the PCB hand desoldering DIN base
- 1 potentiometer cap (knob) for adjusting the level of the headphone output
- 2 systems of squares to consolidate the whole
- DIN socket (if you ever wish to reassemble the neutron in its chassis, the operation is reversible ;) )
- M3 screws and washers

Panel characteristics:
Size 42HP (21 cm), epoxy panel 1,6 mm.
Depth (with MAIN PCB connecting cable): 63 mm.
PCB in epoxy FR4 dual layer, 1,6 mm. Surface finish HASL.

The price excluding shipping costs !!

Manufactured by Christian from ph modular.

To order, please contact me (phneutre56@gmail.com) the terms of payment, delivery times and shipping costs, will be detailed by return mail.
The payment will be in euros (€) and can be done by paypal. Delivery possible in the world, please contact me (phneutre56@gmail.com)
Shipping costs :

https://phmodular.com/kit-neutron/