Dimensions
10 HP
30 mm deep
Current Draw
17 mA +12V
3 mA -12V
0 mA 5V
Price
$250 Price in €

Available as an assembled Module and as a DIY project.

This Module is currently available.

half-size successor to the original Hackerboutique Destructo VCF-1.

dirty, lo-fi pentode tube filter/distortion/waveshaper with loads of unique character. 2x audio input with attenuator and 2x CV input (one with "Fuel" attenuator, one without". crank up Destroy to increase the gain and breakup. tone seems to vary quite a bit depending on the chosen LEDs with some builds sounding harsh and abrasive and others sounding smooth and round. some builds self-oscillate while others don't but most seem to tend towards blippy bit-crushing effects and subharmonic stutters at low input amplitudes. Frequency and Resonance knobs offer basic control over the filter core which seems to be more or less an HPF but both controls alter the filter frequency in a fashion similar to what you might find in a diode ladder filter - a fact which is consistent with the differences in tone based on LED selection. very sensitive to subtle changes in input level while the switch is in "skull" mode while "alien" mode seems more consistent and tame.

https://www.facebook.com/Hackerboutique


submitted Apr 28th 2021, 18:47 by teleosmodular | last Change May 5th 2021, 21:26 by Wrave

3 Users are observing this

Affiliate Disclosure
This page contains affiliate links from eBay, Reverb.com and other partners for which ModularGrid may be compensated.