J-010 Joystick

Joystick

Independent (two) outputs for axis X and Y.
Range knob for voltage amount, Offset knob for voltage offset („centering“) for both axes.
Two LEDs for every axis (easy voltage centering).
Spring centered (springs can be removed but front strong dust-protection rubber still slightly moves stick to center position so I suggest use all time centered with springs).
Industrial grade joystick.

If you´ll connect joystick outputs into J-MATH J-011 module, you´ll get some math (additions and subtractions on independent outputs) and absolute value for Y-axis splitted into two outputs. With this function you can drive for example VCF frequency at upper joystick position and LFO frequency at lower joystick position (for example).

http://ladik.ladik.eu/?page_id=83