No info about availability.
Passive swiwitshable monitor multiple
A passive 2x3 and 1x4 switchable multiple configurable to 1x6 plus 1x4 or 1x7 plus 1x3 or 1x10.
The module has two duo color LEDs for simple monitoring purposes.
When the signal is positive the LED shines red, and green with negative signals. The LEDs are best suited for CV signals but can handle high power audio signals as well. Although 12 volt trigger signals with bursts up to half a second won't damage the LEDs immediately, prolong use will reduce the life quite a bit so I would advise against it.
The LED reduces the signal by about 1,3 volt so they can be switched off. This makes the module also usable as a fixed value attenuator for CV or audio signals. The switch configuration is; LED, isolated multiple, link.
Contact me if you want one, just send a pb to plop over here and also at muff or plopxl at synthforum.nl
