This Module is currently available.
2hp Clock divider module with tap tempo
A 2hp clock divider module with an internal tap tempo. The tap tempo output is normalized to the clock divider input ready to be divided down. Alternatively an extenal clock can be divided down.
The tap tempo section works great for manually creating a tempo for your modular patch to jam with.
Divide by 1, 2, 4 and 8 and also choose between trigger and gate output mode.
The upper button is used to trigger the tap tempo, the circuit requires just two taps to generate a steady clock / gate.
The lower two buttons are used to toggle through and select the clock division.
You can choose from 1/2/4/8 divisions.
The LED display for the DIV count is as follows.
Orange - DIV 0
Red - DIV 2
Green - DIV 4
Blank - DIV 8
The CLK divider can output either gates or Triggers.
The orange LED behind indicates if the output is in Gate or Trig mode.
On - Trig
Off- Gate
Lovingly hand built at Beepboop Electronics workshop in Bristol
Includes power cables, jumper cables and mounting screws and 1 year Warranty
