Tymkrs Bulkhead 1/8" to dual DB25

1/8" to dual DB25 eurorack module

What is it?
8x 1/8" TRS up front, connected to dual D-SUB / TASCAM standard DB25 connectors on the back. Each of the DB25 connector's 8 balanced audio channels are connected to the corresponding front jack and to the same channel on the other DB25 connector.

Use cases!
A single module could be used to connect to a standard eight channel input or output connector on an audio interface or to a multi-track tape deck.
Multiple modules can be daisy chained in series to form an 8 channel bus spanning multiple 3U rows in a case.
Two modules can be used to interconnect two cases together.
A chain of cases or of bus rows can still be connected to an audio interface or tape deck thanks to the dual DB25 connectors!
Why did you make it?
Bussing or interconnecting or interfacing to a converter: By using properly shielded eight channel audio-grade DB25 cables, this ensures maximum protection for your signals, keeping your noise floor as low as possible!

Dimensions
Length: 3u Width: 3hp Depth: 3.5cm (1.38 inches)

Modgrid: https://www.modulargrid.net/e/other-unknown-tymkrs-bulkhead-db25

https://www.tindie.com/products/tymkrs/tymkrs-bulkhead-18-to-dual-db25-eurorack-module/