Turmoil

Trigger disrupter with clock, trigger deflect, skip, burst generator and bernoulli gate.

Overview

This module is useful for adding controlled unpredictability to any source of triggers.

Use the built in clock as a starting point, or feed it external events.

Set the various disrupting parameters, then use the main disruption knob to dial in the wonkiness.

Plenty of CV inputs to keep everything interesting.

Features and controls

CLOCK SPEED: Sets the rate of the internal clock.

RUN/STOP: Starts and stops the internal clock.

EXT CLK: Input for any source of triggers or gates.

DISRUPTION: Master control of the probablity of Deflect, Skip or Burst (see below) occurring.

CLOCK DEFLECT: Sets the amount of time by which a trigger is temporally shifted. Turn up this knob to set the maximum amount that the trigger is randomly displaced. The module monitors the trigger inputs and extrapolates a tempo which it can then use to predict when the next trigger might fall. This allows the triggers to be deflected forwards or backwards from where they would've otherwise occurred.

AB CHANCE: Sets the probability of a trigger being sent to Output A or Output B. Press and hold RUN/STOP when powering up the module to change the outputs from A and B to gates instead of triggers.

ALL OUT: Main output for processed triggers.

There are also 5 CV inputs. When these are connected the knobs function as attenuators.

The two LEDs show the status of the triggers entering and leaving the module.

—

Panel thickness is 2mm.

Output level: 8V

Trigger time: 5ms

https://www.nervoussquirrel.com/turmoil.html