This Module is currently available.
sequentially selects gate and switch outputs
The SEQUENTIAL LOGIC/SWITCH sequentially steps thru (8) 3-position switches.
step & logic (GATE) outputs and three independent
electronic switches are set for each step.
Each switch selects the Upper, Center, or Lower position which in turn switches both the GATE outs and SWITCHes.
STEP and LOGIC outputs Both sets (STEP & LOGIC) of gate outputs output a gate when the active STEP switch selects that position (U/C/L). The STEP outputs reflect the STEP input gate length where the LOGIC outs go high for the length of the STEP. The STEP outs go low between each matching step, where the LOGIC stay high.
SWITCH group
Each STEP position (U/C/L) activates one of three
independent switches. The switches are labeled with IN and out but are bi-directional.
The switch OUT jacks mix to a MIX out.
The switches can be used with audio or CV.
The mix output has a (SMOOTH) switch that switches in a LP filter that is used with modulation signals to remove sharp transitions.