External amplifier and external effects processor
http://www.bastl-instruments.com/modular/hendrikson/
If you had an Unicorn Account you could see a chart with the price development of this module and the average price asked for this module.
Lightly used and stored in a clean environment.Discontinued!Hendrikson is a guitar/instrument amplifier and an interface for external effects processors like stompboxes. The most unique feature is the mix output which is CV controllable crossfader between the signal that goes to the Output and signal that comes to the Input. This means that when used with external effects processor this gives CV control of one of the most important parameters – the Dry / Wet Mix. This is especially interesting when using with fuzz or distortion effects for waveshaping basic waveforms.FeaturesOutput Level knob sets the buffered attenuation of the outputAdjust the output signal to guitar or line level with help of Clipping LEDsInput Gain knob on the input with a modular level indication (5V peak to peak)Voltage controlled crossfader between the output and input signalMIX knob sets the offset and MIX CV adds to set the crossfade at the MIX OUT6.3 mm (¼ inch) Neutrik connectors for Output and Inputhandmade locally by Bastl Instruments in Brno, Czech RepublicTechnical details5HP widthPTC fuse and diode protected 10pin power connector45mm deepcurrent consumption: +12V: <40mA, -12V: <35 mA
This offer was fetched from reverb.com. You cannot contact the seller via ModularGrid. You have to visit their site.
Look up onDisclaimer: Modules listed for sale on the ModularGrid Marketplace are offered explicitly by their respective owners. ModularGrid is not affiliated to the sellers and takes no legal responsibility in any transaction.
The internet is a rough place and fraudulent behavior can occur. If you are concerned about dealing with strangers consider buying your module at an authorized dealer.