8-Step

TRIGGER SEQUENCER

The Orpho 8-Step is an eight-step sequencer with a voltage regulator at the output.

Suitable for drum modules, envelopes, etc.
An incoming clock pulse sets the sequencer into its circular operating mode.
The reset input arranges the reset to step 0.
The desired steps can either be switched on or off with a switch.
The voltage controller regulates the voltage at the output from 0-10 volts.

Dimensions: 3U high, 6HP wide, 35mm deep.

Power consumption: + 12V | 50mA

http://www.orpho.de/8-step-trigger-sequencer/