DSQ-1+

A mounting frame for the Korg SQ-1 with 4hp module space

The DSQ-1+ is a 3D printed eurorack mounting frame for the Korg SQ-1 sequencer. While the DSQ-1 mounting frame offers bigger lettering, the DSQ-1+ uses this area to provide space for a 4HP Eurorack Module. The frame can be ordered via below PayPal links.

For the assembly of the mounting frame, the removal of the back of the original SQ-1 sequencer case is required.
Easy assembly

Remove the batteries
Loosen the thin plastic film on one side which is holding the battery holder in place
Unscrew the 4 front screws
Remove the back and pull the battery holder through the back, that the back can be put aside
Slide the mounting frame in
Use the 4 screws from the front to fix the mounting frame

Powering the SQ-1 can either be done by batteries or via USB with an angled USB cable.

https://www.spillerphoto.com/dsq-1-plus-korg-sq-1-sequencer-eurorack-mounting-frame-with-4-hp-module-space/