GO! by Rakit

Portable 2hp USB C Eurorack Power Supply

The Rakit GO! will take care of your portable eurorack fix. Now you'll be able to take your modules everywhere.
What's more, the GO! has a slew of protection features built in, protecting your GO! module, supply/powerbank and
greatly reducing the chance of damage to modules through user error. The power supply has a robust and reversible
USB C connector for the best possible USB connection. The GO! has been engineered from the ground up, making full
use of 5V powerbanks/supplies that are widely available on the market. At only 2hp wide and 27mm deep, GO! is ready
to fit in any case.

To start using your GO! power supply you will need a passive bus board and your choice of 5V powerbank or USB AC adapter. Our passive Sticky bus board is perfect for your typical lunchbox setup and as the name implies.. its sticky!

Protection Features

Supply/Powerbank protection - reverse voltage, overcurrent (fast eFuse)

GO! Input protection - reverse voltage, overvoltage, undervoltage, overcurrent (fast eFuse)

Module protection - all rails current limited and overvoltage protected

+12V & -12V LEDs indicate bus health (very dim below +-11.75V)

What's included?

GO! Module
18W USB C Cable
16 way ribbon cable
2 x M3 Screws
Manual

Specifications

2hp wide x 27mm deep

Max Current Ratings:

+12V @ 500mA
-12V @ 300mA
+5V dependant on overall system current use (5V can optionally be disconnected via a rear jumper)
These ratings are acheivable with a 5V/2.4A supply/powerbank.

https://www.rakits.co.uk/product/go/