Dimensions
4 HP
30 mm deep
Current Draw
10 mA +12V
0 mA -12V
0 mA 5V
Price
$89 Price in €

Available as an assembled Module and as a DIY project.

This Module is currently available.

Analog touch controller by Cell Factory Sounds

Become part of your system!
Let the electrons flow through you!
Turn your module collection into an instrument!
Play your system with lots of expression (and some unpredictability)!

What is it?
It’s a controller that provides a gate output and a cv output when you touch it.

How does it work?
When touching the gold traces on the front panel, your finger forms part of a resistor divider, generating a voltage in the circuit. This voltage is sent through a slew circuit (with controls labelled ‘rise’ and ‘fall’) before being output as cv at the top right output labelled ‘slew’ (app. 0-9V). The maximum rise and fall time is set by the toggle labelled ‘min max’.

Touching the gold traces also generates a gate at the top left output labelled ‘gate’ (app. 10V). The sensitivity for this gate can be adjusted with the trimmer labelled ‘gate sens’.

The voltage at the slew output depends on the connectivity you provide between the traces, as well as the slew settings. More pressure and/or more surface area touching the traces yields a higher voltage.

What are the specs?
Power connection: red stripe down, keyed header
Current draw: 10mA on 12V, no draw on 5V and -12V
Depth: 30mm including power header
Panel traces and i/o: ±12V safe

https://www.cellfactorysounds.com/#/touch/


submitted Jun 10th 2023, 08:47 by cellfactorysounds | last Change Jul 29th 2023, 11:41 by cellfactorysounds
Affiliate Disclosure
This page contains affiliate links from eBay, Reverb.com and other partners for which ModularGrid may be compensated.