This Module is currently available.
Specs are approved by the manufacturer"MUTE" STEREO module
The SIGNAL SWITCH STEREO module continues the variation of the "SIGNAL SWITCH" module ("MUTE" module), this time with a module dedicated to stereo signals.
Using quality 'vactrols' helps avoid annoying clicks when turning your signals on/off through the module, and adds an interesting fade out. The MUTE of the signals is therefore clean and discreet.
Explanations:
An incoming "IN" L&R and outgoing "OUT" L&R stereo signal can be muted by the activation of a single illuminated push button.
ON = Button pressed, blue LED lit, the incoming stereo signal is routed to the output and therefore remains audible.
MUTE = Button off, the incoming stereo signal is muted. The use of "vactrol" avoids an unpleasant click and brings a slight fade OUT.
The internal routing (normalization) is a passive multiple, per channel, of the 1L&R inputs:
The incoming signal on input 1L is also routed to the other 3 outputs 2L to 4L which retain their own "MUTE" function. Inserting a jack into one of the inputs (2 to 4) breaks the downstream routing. This allows different combinations for its use, depending on your needs. Same for the R channel.
Trick ! You can hijack this mode to invert the routings: stereo signals entering OUTs 1, 2, 3 & 4 can be routed to IN 1 (Attention, only activate one stage at a time, the module is not a mix!).
Two jumpers at the rear (corresponding to the two L&R channels) allow the module to be split into two independent stages:
Thus, the signal entering the 1L input is also routed to the 2L output (which retains its own "MUTE" function). Inserting a jack into the 2L input breaks the downstream routing. Same for the R channel.
AND
The signal entering the 3L input is also routed to the 4L output (which retains its own "MUTE" function). Inserting a jack into the 4L input breaks the downstream routing. Same for the R channel.
Manual soon
The price includes: module, screw M3 and connection cable. Excluding shipping costs !!
Manufactured by Christian from ph modular.
Available as an assembled Module, no kit.
Tested and assembled by hand. All components are through.
To order, please contact me (phneutre56@gmail.com) the terms of payment, delivery times and shipping costs, will be detailed by return mail.
The payment will be in euros (€) and can be done by paypal. Delivery possible in the world, please contact me (phneutre56@gmail.com)
Shipping costs :
3 Users are observing this
