This Module is currently available.
Dual Filter
The SoundForce Dual Filter is a 2-stage cascaded OTA design based on the late MS-20. The design has been fine-tuned with extended resonance control as well as a resonance CV input. Each filter can be either a 12dB/oct low-pass or 6dB/oct high-pass. To keep the module HPs on the low side, the filter mode setting is located on the back of the module. The module was designed to be a very affordable full-featured modern filter.
Features:
The SoundForce Dual Filter features 2 identical filter sections, one on the left and one on the right. Each filter has 2 audio inputs (one of which has a level control pot IN1), a manual cut off frequency pot and a manual resonance pot. There are 2 CV inputs for the cut off frequency both with their attenuverters and 1 CV input for the resonance with an attenuator.
More info: http://sound-force.nl/?page_id=3056
Specifications:
– 12HP
– Depth: 38mm (including power connector)
– Power: +12V 40mA, -12V 40mA
– Cutoff CV inputs range -10V to 10V
– Resonance CV input range 0V to 10V
4 Users are observing this
These merchants probably sell this module. Huh?