This Pedal is discontinued.
Analog Tap Tempo Controller and MIDI Master Clock Pedal
The Disaster Area SMARTClock is an intelligent tap tempo and clock source for your pedalboard. The SMARTClock sends both MIDI clock and analog tap tempo signals to a variety of pedalboard devices.
Features:
Blue LED display shows tempo in Beats Per Minute
Two (2) isolated optical relay powered Tempo Outputs, compatible with normally open or normally closed (Boss) devices
Tempo Outputs may be used as non-tap expression or function switches
MIDI Clock output synchronizes all connected MIDI devices
MIDI input and output with full thru and merge functionality
Multi-Jack functions as tap tempo input, third Tempo Output, or additional MIDI output (requires adaptor cables.)
Tap Tempo mode with selectable tap subdivisions for each output
Preset mode with twelve (12) user-accessible presets, clock start and stop
Preset mode may send MIDI Program Changes to other devices
Up to one hundred twenty-eight (128) presets may be accessed using an external MIDI controller
Receives external MIDI clock from a computer or other device, Tempo Outputs sync to incoming clock
Sends tap signals and clock from 30-240 beats per minute, accurate to 0.07%
Available subdivisions include Whole, Half, Half Triplet, Quarter, Dotted Eighth, Quarter Triplet, Phi (Golden Ratio,) Eighth, and Sixteenth Notes
The SMARTClock is simple to use – just tap the footswitch and all your gear will synchronize to its internal clock. The SMARTClock has two performance modes, selectable by pressing and holding the knob.
In the Tap Tempo mode, the clock is set by either turning the knob or tapping the footswitch. Tap the knob to set the Tempo Output subdivisions, then hold the footswitch to save the tempo to the current preset if desired.
In Preset Mode, the clock rate is set automatically based on the tempos saved in the SMARTClock memory. Tap the footswitch to move to the next preset, or to start the clock if the clock is currently stopped. Hold the footswitch to stop the clock. Turning the knob selects a new preset.
The innovative Multi-Jack can function as either a dedicated remote tap tempo input jack, third Tempo Output (requires PTP adaptor,) or a second MIDI output. The Multi-Jack can communicate directly with the Chase Bliss (Wombtone, Warped Vinyl, Gravitas) and Empress (Tremolo 2 and Phaser ) pedals using an appropriate TRS cable. The Disaster Area TRS to MIDI cable is required to use the MultiJack as a standard MIDI output.
The Multi-Jack may be used as a MIDI Clock Filter – set the JACK configuration to nCLK and it passes through all MIDI information except for MIDI Clock. This configuration prevents the clock from changing the pre-delay on the Strymon BigSky.
