it looks very similar to my system
but i have the ADDAC Monster 7 rows + 1 row in addition
molemuc
molemuc_addac_8_rows_2020_April
and this is not the end ;-)
At first I wanna thank you for your ideas.
I bought the Braids & Clouds before they disappeared from the market. To me they sounded good (live and via YouTube) and were pretty versatile, don't you think so?
Regarding the mutliples I will follow your advice. All other modules were just ides, so I would be really curious what you would change if this was your rack! I am totally open minded. As I also have the Minibrute and the Grandmother I already have some firepower (At least I am almost sure I do not need another analog oscillator).
So here is the changed rack:
It still shows the old one???
Thanks for the advice. I will definitely check out the MISO that sounds cool. Yeah I kinda felt between the storm, lubadh, and chronoblob2 I had perhaps too many effects (especially considering the things the distings can do).
Yeah I've been drooling over modules for awhile then with the corona-bucks coming in (in the USA) got a bit of seed money to start this exciting but dangerous habit. Yeah I am trying to figure out how to mix the different signals. Right now with my limited set up I am using the quad VCA as a mixer. But once I have more reason to use VCAs I will refigure out how to mix things down. I will cross that bridge when I get there.
I more meant, that it looks like according to this that the Storm is a direct copy of the microcell that was undercut in price massively at release (though that is allowed based on Creative Commons license). Source: https://www.muffwiggler.com/forum/viewtopic.php?f=16&t=217247&start=25 Here the microcell maker seemed a bit peeved and I felt bad that I bought a copy without knowing.
Thanks, again!
Actually, the Mutable Instruments modules are open source projects. Yes, that also means that Mutable doesn't get paid from the clones...but it DOES mean that when Mutable takes them out of production, there's still ways to acquire that same circuitry, even if the panels and form factor might be different.
The only "hole" I see here is that there's no dedicated method for manipulating CV and modulation signals...mixing, inverting, etc. But the rest of the choices are very solid...which means there's going to be a problem in trying to jam that functionality in. My choice for what should go would be the Chronoblob2, which would open 12 hp. This would make two very good CV manipulators possible: the 4ms SISM and Tiptop's MISO. Both of these allow DC-coupled mixing, but also inversion, various CV arithmetic functions, etc, and having those will really blow open your control possibilities. Plus, if you still insist on having the delay line in there, the MISO would allow for a 2hp Delay; if you locate this on the very end of a row, it'll still be easy enough to manipulate.
But if tandemmed with the 0-Coast, this is a pretty damn good build. Presumably, you'd sum your audio back down to the 0-Coast's output to get the levels down to line. Looks like you did your homework here!
Hey everyone,
I am starting to dip my toes into Eurorack as my quarantine new hobby/exploration. About a year ago I got an Make Noise 0-coast and more recently a Moog Grandmother to start seeing how I liked it. Turns out I enjoy the patching and noise exploration side of things. So far music I've been making has been wonky noise, dark techno-ish, experimental things but that's mostly because I don't have a full grip. Eventually I would like to figure out making generative ambient while also enjoying dark music.
In the last week I got a Pamela's New Workout, Storm (Clouds expanded clone... I learned this company copied the design from another... sorry other company!), quad vca, maths, and Rene v2. I've been using the 0coast and grandmother oscillators and other functions. But below is how I envision building it but I would love some feedback.
Anyways, do I have any glaring holes (apart from drums/percussion- I will likely explore that once I have a solid effects and synth voice oscillator system)?
Thanks!
Hi Kel,
You are welcome and I am glad to hear that things run well. So it looks like it was worthwhile mentioning it here in this forum :-)
I wish you good luck and I look forwarding in hearing from you as soon as your second album is ready! :-D
Kind regards, Garfield.
For review reports of Eurorack modules, please refer to https://garfieldmodular.net/ for PDF formatted downloads
Oh, good...those are the ones that are an utter PITA, people drop 'em into builds because the listings can't be made to show they're discontinued and all that...
The thing that immediately jumps out at me is the excess of mults. You've got an Intelljel buffered mult, a Mutable Links, and an Erica Mix/Split. That's 10 hp of mults in a build that only has 176 hp in it to start with! Now, I know that the idea here is to crosswire several synths, but this is overkill; you can accomplish much of this with inline mults, and keep just the Links for a single buffered mult and the crossmix capabilities. Then I'd suggest dropping in a 6 hp something such as an Intellijel TriplATT or a Happy Nerding 3xMIA to allow you to mix/invert your CV and mod signals. That would be way more versatile than just multing things, because you'd then have more tweakable control over those non-audio signals. And good onya for making sure to put the MScale in to deal with the interfacing issues inherent between "normal" Eurorack and Moog's take on it.
Otherwise, this is actually a fairly solid build, given the space constraints. I would've chosen different modules, but the architecture I'd go for would be fairly close to what you've created here, save for that one issue above.
Thank you very much for your kind words - it means a lot to me that you took the time to listen to my weird music :)))
Actually I am getting a lot of very good feedback from many different people and quite a lot of sales too - so I am feeling really quite flattered at the moment! And goodness knows the cash helps at the moment, got nothing else coming in at all.
Feel free to ask me questions, if I can help you on your musical journey I will - you might not be light years away after all ;)
Same goes for anyone :)
I am working on more music, probably something quite different, maybe... not sure how it's going to turn out yet!
Thank you again :))
Kel
During the last 11 months I have gradually built my rack as a complement to my Minibrute 2S.
The advice I have got in this forum has been invaluable. Thanks!
Now I will ”close” my rack and fill the remaining 19 HP with some more modules.
I am most into generative ambient stuff and think I have enough of utility modules.
But I need some more sound generating/manipulating sources and it is hard to make a choice.
My present ocillators: Minibrutes two VCO, Plaits, 2hp Pluck and Erica Synths Pico VCO.
One module I am thinking of is a Clouds clone like Monsoon.
Another choice could be som kind of complex oscillator as I like my Plaits very much.
But I am also considering a chord module like Chord v2 from Qu-Bit Electronix.
I would be very glad If I can get some advice how to beef up my ambient patches.
Which two, though? Your build has FIVE Mutable modules in it...
Hi Kel_,
Wow! Not just one track, no-hoo! Straight away you surprise us with one complete album and a total of 13 tracks! Well done! The first track hit me directly and overwhelmed me with the professional level of music I am listening at.
While I am writing this message to you, I continue listen at your album. It sounds indeed like you put lots of work into this and I think it's pretty fruitful. He, he, I just hear now a lot of stereo effects in your "Kall To Answer". A nice of mixture of track-lengths you are using too. I discover a lot of creativity in your work that I admire; I am light-years away from what you are able to do here!
Sorry, I have no time left to write more messages, I have a more important matter at hand right now... continue listening at your album that is ;-)
Thank you very much for sharing and kind regards, Garfield Modular.
For review reports of Eurorack modules, please refer to https://garfieldmodular.net/ for PDF formatted downloads
Hey everyone,
First post and my very first LP release - finally!! It has only taken me 30+ years!!
I never do self promotion like this, but I am told I have to change my ways if I ever want to have any hope of selling, so here I am :)
https://kel-audio.bandcamp.com
Hope you enjoy it - I am pretty proud of it :))
Any purchases very, very welcome in these challenging times!
Feel free to ask me any questions about how I made it, kit used etc. I will do my best to answer :)
Be safe & stay healthy!
Lots of love
Kel
experiment with a lot of different things but mostly more ambient style, crazy chords, and endless randomnesss to experiment with. I already have a mother-32 and DFAM
also will the main picture in the first post update if i make changes?
And also would a marbles be better than the chance in ur opinion?
Thanks for your take lovscho,
For this small rack I think I can use external splitters instad of mults, that saves some space. I agree on the LFOs and ADSR thing though. I'll see if I can manage with the Zadar and the Batumi, otherwise I guess I'll have to replace the Morphagene with some other modules.
I also try to figure out a nice setup with the Minibrute.
https://www.modulargrid.net/e/forum/posts/index/8536
At first site your setup is simple and I am almost sure anything can help to improve the versatility of the Minibrute. I think multiples, an Expert Sleepers Distinc, LFOs and ADSRs are things you can never have enough of
Dear fellows,
I am also in the process of setting up a little Eurorack setup to compliment my Minibrute, DFAM and Grandmother, but flexible enough to work with only one of them if needed. I already own the the two modules of Mutable Instruments.
My music will be versatile, but based on deep house and ambient/chill.
Hope for your support!
+1 for klavis twin waves and a woggle bug V1 would be nice also
Hi Ingsock. What kind of music/sound are you hoping to perform with this rack?
One more interesting thing...
what do you think about the Vermona random rhythm?
Thanks, very interesting stuff.
But I think the Mito does exactly what i need, unfortunately it is hard to get.
One more question: i see it has global shuffle, is it also possible to add shuffle to each channel separtely?
In other words with which module can i control the cv to get slight variations?
Do i need the DEVIANT as well or is it possible with other modules, too?
Thanks for your help
plan to go with the intijell 7U performace case 104hp.
A second set of eyes would really help
Also after a year i still kinda have no clue what im doin, so Here Goes!
thx in advance
Maybe you can look into something like the MI Grids or the Eucledian Circles. Mylarmelodies has an interesting video about Eurorack drumming:
Also you may want to check out how he is using switched multiples:
Adding something like this into your workflow may allow yo to achieve what you need, or at least give you some ideas of what kind of modules can work for you.
oh, thanks! Looks pretty cool, really like the Moffenzeef stuff. Gonna check that out.
By the way thanks for the tip you gave me for the Pique ;-)
Do you have any other advice for good modulation of the cv inputs?
My rack is shown an old version, strange, here is the current:
Look into the Moffenzeef Mito for on the fly clock division and rhythm adjustment. It’s a fun module.
Hey everyone,
i am new in the game and i need your help again.
This forum helped me a lot to build my rack and dig into the modular world.
I am looking for a rack or better for a module to perform intuitively live,
mostly with rhythms for industrial techno and harsh sounds.
This is what my rack looks like now and i am pretty happy with the sound
and the few rhythms i can generate. But i am looking for a module to change my
rhythms on the fly to get more dynamics. I don´t want to dig into complicated
moduls or working with saved sequences. I hope i express myself clearly, argh.
I thought i could add more dynamics with other clock dividers/ multipliers or even shuffle modules.
But here i need your experiences. I was looking at the Bastl Instruments - Little Nerd
or 4ms shuffling clock, modules where i can change stuff fast. Or mybe i need a module to
change/modulate my existing stuff better.
The numeric repetitor works fine and i also experimented with the cv inputs but it is too random
or i just didn´t figured it out yet.
Do you have any other advises?
Thanks a lot.
Phil
Hi Rookie,
Thank you :-) I try to help here and there if I can, and in the hope that when I have a question in the future, there will be persons willing to help me out too :-)
Keep up the nice music-work, happy Easter and kind regards, Garfield.
For review reports of Eurorack modules, please refer to https://garfieldmodular.net/ for PDF formatted downloads
There's definitely problems on the horizon here. Jim's comment about "utility modules" is a very good point; you have a lot of "sexy" here, but no "sauce", because the boring modules that bring the REAL voodoo are missing. Also, loads of this could (and SHOULD) be reduced in size by using third-party builds for the Mutable stuff, which would also provide more space for the utilities, and by simply using smaller versions of the same ideas you have present. Presuming that this is a RackBrute 6U, you just don't have the room you need in 2 x 88 hp to do too much given the way things are going here. And yeah, if you opt for a different case with more room, you'll get a lot closer to the direction you're aiming for here. Remember, the Rackbrute was primarily intended as an expansion for the MicroBrute 2 and 2s, so it doesn't have to be huge because you'd have a whole other synth to patch into.
One other caveat that I seem to be giving more and more as of late: if you've not spent a MONTH or two (or more!) fiddling with, studying, and refining builds on MG, you're nowhere near the stage of dropping a wad of cash on the physical device. ModularGrid IS NOT a video game; you get no bonuses for trying to "speedrun" this process. There are loads of negatives that WILL crop up from trying to get everything right on your first MG builds, all of them rather expensive. Take this slowly, examine everything more carefully, and research deeper. You'll get a better result from it.
-- Lugia
Thank you for your recommendation regarding the MI clones. I notice that some of the clones have less HP but not all of them. Presumably, all of the clones are identical in processing and the only difference is aesthetic and layout?
The Rackbrute case is somewhat modular in that you can add another 6U to it later. I could use the TipTop Mantis which offers more HP but you can't stack another one vertically later. I guess it's just a matter of trade-offs.
Do you have any recommendations regarding utility modules that you think the rack lacks? Thanks in advance!
I want to do all of the sequencing inside the rack. Are you suggesting a Varigate 4+ in addition or replacement to the Marbles? Just checking that module out now.
-- WeAreTheProject
I would think a Varigate 4+ for more predictable sequencing and Marbles for random duties, so both together would probably be a fun combo.
Maths is way more than 2 LFOs/EGs - it also has a mixer/attenuverter section that is really useful and take a look at the Maths Illustrated Manual for patch ideas
Data takes up quite a bit of space in a small case - I'd go for the tiptop Mantis instead of the Rackbrute - about the same price, but more space and no annoying power input module!!!
Other than that I would add utility modules - the dull polish that makes the shiny modules shine brighter - which are a fundamental part of a modular synthesizer that most newbs forget as they don't understand how to patch yet so fill their cases with expensive modules
-- JimHowell1970
I know that Maths offers more versatility - I was just referencing 2 vs 4 in terms of cost per LFO/EG, if that makes sense?
I placed the Data in the rack but it's something that I would only intend to get much further down the line.
I like the design of the Rackbrute and can get it £70 cheaper than the Mantis but you make a good point about the extra HP.
What utility modules would you recommend based on what you think my rack is missing? Thanks in advance!
Hmmm... Maths is a very flexible module. It really can do a lot (check out Loopop's YouTube videos), and would probably cover many of the functions of the Quadrax and Blinds. I've got both Quadrax and Maths in a larger case and I'm finding new uses all the time. You may find a Maths/Batumi combo valuable in this case instead of Quadrax/Blinds, but everyone works differently. Maths was not immediately intuitive for me, but I'm really appreciating it now.
I question the value of the Data in a small case. It's a lot of hp, but again you know your workflow and needs better than I do. The factory build of Clouds is discontinued and you will probably pay a premium for an original build. You may want to take a look at some of the smaller clones like the Monsoon if you want to save some money and space.
Finally, will you be relying on Marbles for all of your sequencing, or do you have an external sequencer? I would take a look at something like a Varigate 4+ if you want to do some more sequencing in the case. Adding some mults and switches might be something to look into as well.
I'm sure some of the other folks here will have other valuable advice for you. Good luck and have fun!
-- farkas
You can only use maths as a single attenuverter if you need to use channel 3 as the offset though, right?
I placed the Data in the rack, however, it's something that I would only intend to get much further down the line.
I knew that Clouds was discontinued, however, the module sold well so I presumed that there would be loads of them kicking around on the second hand market. I didn't think about the prices though so I should look into that.
I want to do all of the sequencing inside the rack. Are you suggesting a Varigate 4+ in addition or replacement to the Marbles? Just checking that module out now.
I didn't add any mults because I was intending to use stackable cables but yeah a basic Doepfer switch would be a good idea.
There's definitely problems on the horizon here. Jim's comment about "utility modules" is a very good point; you have a lot of "sexy" here, but no "sauce", because the boring modules that bring the REAL voodoo are missing. Also, loads of this could (and SHOULD) be reduced in size by using third-party builds for the Mutable stuff, which would also provide more space for the utilities, and by simply using smaller versions of the same ideas you have present. Presuming that this is a RackBrute 6U, you just don't have the room you need in 2 x 88 hp to do too much given the way things are going here. And yeah, if you opt for a different case with more room, you'll get a lot closer to the direction you're aiming for here. Remember, the Rackbrute was primarily intended as an expansion for the MicroBrute 2 and 2s, so it doesn't have to be huge because you'd have a whole other synth to patch into.
One other caveat that I seem to be giving more and more as of late: if you've not spent a MONTH or two (or more!) fiddling with, studying, and refining builds on MG, you're nowhere near the stage of dropping a wad of cash on the physical device. ModularGrid IS NOT a video game; you get no bonuses for trying to "speedrun" this process. There are loads of negatives that WILL crop up from trying to get everything right on your first MG builds, all of them rather expensive. Take this slowly, examine everything more carefully, and research deeper. You'll get a better result from it.
Oh, it is! Not only do you have the MIDI over USB interfacing, the setup memories, the expandability...you ALSO get arpeggiation and some basic sequencing trickery. Really, this module is the sort of thing you'd expect Billy Mays to be screaming at you about on late-nite TV...it even makes a killer grilled cheese!
Maths is way more than 2 LFOs/EGs - it also has a mixer/attenuverter section that is really useful and take a look at the Maths Illustrated Manual for patch ideas
Data takes up quite a bit of space in a small case - I'd go for the tiptop Mantis instead of the Rackbrute - about the same price, but more space and no annoying power input module!!!
Other than that I would add utility modules - the dull polish that makes the shiny modules shine brighter - which are a fundamental part of a modular synthesizer that most newbs forget as they don't understand how to patch yet so fill their cases with expensive modules
"some of the best base-level info to remember can be found in Jim's sigfile" @Lugia
Utility modules are the dull polish that makes the shiny modules actually shine!!!
sound sources < sound modifiers < modulation sources < utilities
Hmmm... Maths is a very flexible module. It really can do a lot (check out Loopop's YouTube videos), and would probably cover many of the functions of the Quadrax and Blinds. I've got both Quadrax and Maths in a larger case and I'm finding new uses all the time. You may find a Maths/Batumi combo valuable in this case instead of Quadrax/Blinds, but everyone works differently. Maths was not immediately intuitive for me, but I'm really appreciating it now.
I question the value of the Data in a small case. It's a lot of hp, but again you know your workflow and needs better than I do. The factory build of Clouds is discontinued and you will probably pay a premium for an original build. You may want to take a look at some of the smaller clones like the Monsoon if you want to save some money and space.
Finally, will you be relying on Marbles for all of your sequencing, or do you have an external sequencer? I would take a look at something like a Varigate 4+ if you want to do some more sequencing in the case. Adding some mults and switches might be something to look into as well.
I'm sure some of the other folks here will have other valuable advice for you. Good luck and have fun!
I'm looking to purchase my first Eurorack with drone / ambient in mind.
Any advise or criticism before I purchase anything would be greatly appreciated!
I was considering using a Maths or Stages instead of a Quadrax. I know that Maths has a much longer LFO rate but it only offers two EG's / LFO's. Thoughts?
Awesome! thank you Lugia and Senor-Bling for your great feedback! I'll be watching more tutorials about the FH-2, seems like this module is a rabbit hole in it self ha!
Thank you very much for your remarks!
They make me very happy and you have such a kind attitude in all your posts in MG:s forums.
What Lugia said, basically. If you want to do more than sequencing drum modules with an Elektron device the FH-2 is perfect. Because the best thing about Elektron's Midi sequencers is their ability to plock Midi CC. And most other Midi-CV modules severely limit the CCs one can use. As far as versatility is concerned the FH-2 has very little competition (Endorphines Shuttle Control, Polyend Poly 2), but the option to expand it up to 64 outputs makes it unique (in fact, you could have 64 CV + 64 gate outputs). So far I've got 3 expansion modules and I could easily use a few more. The initial setup isn't exactly intuitive but it's so worth it - and most importantly it just works.
My vote goes for the FH-2 here. Here's why...
First of all, it's intended to work as a USB host. This is a tad different, because it means you can connect MIDI-over-USB devices directly to it. This will result in a bit better timing, but also in that you can use the FH-2 to connect pretty much any USB controller into your modular rig...and your DAW, too.
Second, while it does require a bit more programming savvy, once it HAS been programmed for your use, then there's little need to do that again. But the FH-2 improves on this by adding some extra operational modes AND by allowing memories for different setups. So, let's say you're using this with the Digitakt in your studio, but you need to gig live with it being controlled by a Keystep. Simple...just switch your preset to a different one, plug in the appropriate device, and there you are!
Third: MPE, baybee!!! Yeah, you can hook up something like a Linstrument to it, and as long as the FH-2 has been taught what to do with it, you're golden. You can also assign any of the MPE controls to a CV output, so...well, that's a rabbit hole in of itself!
Last: expandability. If your modular grows, the FH-2 can grow...up to 7 more FHX-1 expanders can be linked to it for a maximum of 64 assignable outs.
And, oh yeah...you can use it to auto-calibrate your VCO tunings. Smooth!
Hello fellow Wigglers! this is my first post, please be gentle :)
I recently ordered an Elektron Digitakt and it'll be a great standalone device but I would love to incorporate it into my current rig.
Youtube has already given me good options like the Mutant Brain, Hermod, Polyend Poly, and the Expert Sleepers FH-2. The CV OCD was also another option but i would prefer to keep everything contained in my eurorack. If anyone has ever had any experience in this situation i would deeply appreciate some sage advice. I definitely would like to future proof and have some versatility with whatever module i do end up going with!
The Mutant Brain seems optimal in terms of price and size and the favorite of the bunch from what I've seen and read but I'm a little intimated by the mutant brain surgery set up. My personal preference is the Hermod although i might be distracted by all the bells and whistles it has among the midi to CV capability not to mention a lot of menu diving.
My current set up:
- Main voice and sequencing is Intellijel Atlantis/Metropolis ( tasty tones, sh101 is one of my favs)
- Drums are a couple tiptop audio 808 modules and peaks in bass drum mode with a 4MS RCD tiggering
- Mutable Intruments Clouds with parasite firmware for FX (and music concrete magic)
- Make Noise Brains and pressure points transposing metropolis or triggering other things
- Bastl ABC and MI Veils as my mixer and vca
- Intellijel uJack sending out to my interface or headphones
I know I'm missing some plumbing and other useful modules but i have minimal space in my 84hp Doepfer rack.
My main goal was to have a eurorack able to handle late night acid jams and more experimental soundscapes and its certainly capable of both but with the addition of the Digitakt I'll be able to free up space (i.e, get rid of the drum section) for the midi to cv module and other versatile options!
Sorry for the long post! thank you for taking the time to read this and for your input!
Hi Rookie,
Again, after a hard day work, then listening at your music, this track, fantastic! I couldn't wish for more, other than one more of your tracks ;-)
I still love the view of your rack, it's a nice combination!
Kind regards and I look forward for your next track, Garfield.
For review reports of Eurorack modules, please refer to https://garfieldmodular.net/ for PDF formatted downloads
Plaits and 2hp Pluck plays the chord sequence Am Dm Bdim and Em. Minibrute VCO1 and a Disting sampled flute plays an A minor pentatonic scale randomly.
I bought from @yari an Intellijel Morgasmatron and it was as new.
Excellent communication and fast delivery.
Highly recommended!!!!
Hey Farkas,
The Happy Nerding mixers are really interesting, in fact I used the 3x stereo mixer in the first draft of this rack but finally replaced it with the Intellijel Mixup because it can do 2xmono and 2xstereo plus it has mutes, which I think I'll be using quite often.
I've heard mixed opinions about the Morphagene and I'm eager to give it a try anyway. I'll be purchasing it last, just in case, because it takes a lot of space which I may decide it's better used with some other modules.
Thanks for sharing your opinion!
Hi Saramago,
You wrote: Sent a trigger from beatstep to kick, mult it to the doepfer envelope, envelope out to vca but no luck, still a lot of decay.
Hmm, are you splitting many signals from your multiple to the envelope? If yes, is that a buffered multiple? If not, then try a buffered multiple otherwise nothing comes to mind. Which envelope are you using, would that be the A-140(-1)? If yes, if you need a quick response then don't forget to put the switch on the A-140 to M (medium) or even H (high) speed, so the EG can follow your rhythm. Needless to say that the D(ecay) knob should be at 2 or less for your case. The VCA you are using, which one is that?
Good luck with the troubleshooting and kind regards, Garfield Modular.
-- GarfieldModular
Thanks mate !
Will try for sure
Hey Garfield Modular:) It is what I already have.
Yes sure, once it is full and if still in need of more modules then the DFAM will certainly be the first one to come out and go back to its case:) But will try to first make sure that I cannot make do with a full case as it is for now. Thanks
Hi Sislte,
Wow! You got your case from the video quite a bit updated and transformed to a rather large modular system :-) Yes, I agree, seeing the real thing is nicer :-) However for planning the "My Modular" racks are nice to use and are very helpful.
How is your experience with the DPO of Make Noise, is it worth the investment? I am (extremely) happy with the STO of Make Noise but I wonder (looking at the price) if the DPO can cause me that much pleasure as well?
Enjoy your modular system and kind regards, Garfield.
For review reports of Eurorack modules, please refer to https://garfieldmodular.net/ for PDF formatted downloads
Hi Yiannisel,
The above rack, is that what you are planning to have or did you got that already?
In my opinion, I would either go for an extra rack for some extra space, so you don't have much planning-worries about those 21 HP or, the cheapest solution, remove the DFAM and put that back in its own casing, that saves you here almost one third of your rack space... well at least 60 HP :-)
Kind regards and good luck, Garfield Modular.
For review reports of Eurorack modules, please refer to https://garfieldmodular.net/ for PDF formatted downloads
Available for purchase here: http://detroitunderground.net/modular/du-ino/
