Riverside

Description

Strymon Riverside Multistage Drive Guitar Effects Pedal A mint world of drive. Riverside is the culmination of a thorough analysis of numerous analog and vacuum tube circuits. Our goal? To deliver a mint world of harmonically rich, incredibly versatile, tube-inspired drive sounds. We didn’t want to build just another distortion or overdrive. We kmint we must examine what has been done, and bring a mint approach to the world of drive sounds. Discover your amp’s potential. Riverside’s cascading gain stages create harmonically rich tones that are immensely musical and natural—from silky clean overdrive to colossal distortion, and all points between. Our analog JFET front-end ensures that Riverside responds to your guitar with uncompromised dynamics and feel. The precision crafted DSP generates dynamic complexity and pleasing harmonics at every stage, letting your amp shine at any gain level. Riverside takes your amp to places you never kmint it could go. Infinite sweet spot. Riverside’s continuously variable circuit tuning dynamically tweaks multiple parameters under the hood so that the sweet spot follows you at any gain setting. As you turn the Drive knob, Riverside makes continuous adjustments, tuning the circuit for optimum tone. This results in an incredibly versatile drive pedal that is equally capable of providing sparking cleans, mild overdrives, high-gain leads, and heavy saturated distortions. Flexibility to adapt to any amp. Your amp choice has a large influence on the sound of any drive pedal connected to it. Riverside’s musical 3-band EQ, with independent Bass, Middle and Treble knobs, is designed to complement your amp’s tone with the flexibility needed to dial in your sound effectively and efficiently.  The three-position Presence switch tailors the highest frequencies, allowing Riverside to integrate perfectly with any amp or setup, no matter how dark or bright. Listen Riverside can adapt and integrate with any setup, no matter how dark or bright. It can also be tailored to take your amp where you never kmint it could go—letting it shine at any gain level. This audio example demo features a wide range of amplifiers, guitars, and pickup types. In-Depth Strymon sound designer and DSP engineer Pete Celi takes you on an in-depth tour of Riverside's sounds and features. Pete talks about the JFET and DSP gain stages, the circuit tuning going on behind the scenes, and goes over the sonic capabilities in detail. Digital or analog?We chose both. The first stage of Riverside’s custom multistage drive topology is an all-analog, ultra low noise, discrete, class-A JFET circuit. This gain stage is digitally controlled to maximize headroom while adding as much as 20dB of pure analog gain, with tight integration to the subsequent DSP gain stages.With our hybrid approach you get the best of both analog and digital worlds: The JFET stage provides exceptional touch sensitivity and dynamic interaction with your guitar, while the incredibly powerful SHARC DSP facilitates the great level of detailed complexity and responsiveness you’ll want to hear. Features Everyone has a favorite. Riverside allows you to save and recall your favorite settings. Simply dial up your favorite sound, and press and hold the Favorite switch to save these settings. Instantly recall these settings with the press of the Favorite switch, or press again to return back to the current knob settings. It’s like having two drive pedals in one. Presence of mind. Riverside gives you a three-position presence switch to tailor the highest frequencies of your output signal. Minus (-) provides clarity with a controlled top end that works well with brighter amps. Enhanced (center) extends the top end to allow for more sizzle on high gain tones. Plus (+) delivers extended high end detail to the darkest amps, and is also useful when plugging directly into a power amp. Tame the noise. Riverside has an optional, variable-threshold noise reduction feature to tame hum, buzz, and system noise when you’re not playing. A downward expander with advanced signal detection techniques creates a seamless transition to noise reduced silence with all types of input signal dynamics, including staccato bursts and slowly decaying sustained notes. Get a boost. Chances are, you won’t want to wait for your solo to turn on Riverside. The boost pedal input allows you to leave Riverside on all the time with just the amount of dirt, distortion, and drive you desire, and then boost your overall output signal by up to +6dB when you need to jump up in the mix. Connect an external switch to engage and disengage Riverside’s Boost. Morphing expression control. Connect an expression pedal, and enjoy a whole mint level of instantaneous, continuous control. Set as many knobs as you like for the heel position and toe position of your expression pedal, and all settings will simultaneously morph throughout the full range of the expression pedal. Riverside becomes part of your musical instrument, an extension of your musical voice, an active part of your performance. Turn up the volume. The Expression pedal jack can be set up in Volume Mode, which provides a logarithmic taper for smooth volume control. If you have an expression pedal, this provides an excellent alternative to a standalone Volume pedal.  Your favorite just got more powerful. Want to control the Favorite preset settings on multiple Strymon pedals with just one switch? Connect a TRS cable from Riverside’s BOOST jack to the EXP input of another Strymon pedal and simultaneously engage the Favorite settings on both pedals. Specifications Sound Design Custom cascading multistage distortion topology provides a wide range of tube-inspired drive tonesDigitally controlled analog class A JFET input gain stage maximizes headroom while adding up to 20dB of pure analog gainPrecision crafted DSP gain stages provide detailed complexity and responsivenessLow gain channel for smooth classic overdriveHigh gain channel for modern saturated distortion3-band EQ with independent Bass, Middle and Treble controlsSelectable post-analog gain mid-band EQ pushPresence switch to tailor the sound for use with all amplifiers from dark to brightOptional variable-threshold noise reduction helps tame noisy guitar pickups Ins, Outs, and Switches High impedance mono inputMono outputFavorite footswitch to save a favorite settingExpression pedal input allows the connection an expression pedal for simultaneous morphing control over multiple parameters (Expression mode), or logarithmic taper for smooth volume control (Volume mode)Boost pedal input allows connection of an external footswitch for up to +6dB of analog boost, or to toggle the Favorite preset on other Strymon pedals (Favorite Out mode) Audio Quality Ultra low noise, high performance 24-bit 96kHz A/D and D/A converters provide uncompromising audio qualityPremium analog front end and output sectionSuper high performance SHARC DSP in a compact form factor32-bit floating point processing More True Bypass (electromechanical relay switching) or selectable transparent Analog Buffered BypassStrong and lightweight anodized gold aluminum chassis9V DC power supply includedPower requirements: maximum 9 volts DC center-negative, with a minimum of 250mA of currentDimensions:Designed and built in the USA4.5″ deep x 4″ wide x 1.75″ tall11.4 cm deep x 10.2 cm wide x 4.4 cm tall

This offer was fetched from reverb.com. You cannot contact the seller via ModularGrid. You have to visit their site.

Disclaimer: Modules listed for sale on the ModularGrid Marketplace are offered explicitly by their respective owners. ModularGrid is not affiliated to the sellers and takes no legal responsibility in any transaction.
The internet is a rough place and fraudulent behavior can occur. If you are concerned about dealing with strangers consider buying your module at an authorized dealer.