This Pedal is currently available.
Isolated power supply
The VITOOS ISO4PLUS is the flagship model of its POWER PACKTM series power supply for effect pedals, with FULLY ISOLATED GROUND, 8 outlets @ 9V500mA. The high light of this power supply is that it is all isolated with such a smaller, lighter body.
If you own some pedals using 18v, you may use them at the same time with your other pedals running at 9v, or even if you want to get more dynamic and sparkle sound, some pedals can be originally running between 9v and 18v just like some fulltone pedals. (Not all pedals can be used with 18v, make sure you read through the manual, any damage because of the incorrect connection will not be warranted)
The ISO4PLUS will drive EIGHT pedals from the same source, it’s more than a power supply, it’s a power conditioner which supplies a predictable voltage all the time and keeps your pedals in constant performance from one show to another.
Features
Fully Isolated outputs provide a stable and noise free performance.
Powers EIGHT 9v pedals all at once without losing any signal intensity.
Come with totally 8 DC cables to connect your pedals to the ISO4PLUS, and 1pc of Y cable to boost the voltage.
The pedals might come out with a different sound by using such a Y cable.
Short Circuit Protection ensures the stable working condition.
The LEDs of each 9v OUTLET will light on to indicate the using mode, it also indicate the fault pedals when the LEDs turn on RED, meanwhile, the ISO4PLUS goes in self-protection mode and it will auto-restart in about 2 seconds once you unplug the short-circuited pedal.
FCLC (Foldback Current Limiting Circuit) provides ultimate protection against power shortages and overloads. Even at full load, you’ll enjoy the quiet and cool operation of a fully regulated power supply.
Most battery-powered effects rarely exceed 30 milliamps each, you’re not likely to use anywhere near the ISO4PLUS‘s capacity of 2000 milliamps output.
Connections
Plug the included AC adaptor into the ISO4PLUS’s in-12v jack
Connect the AC adaptor to 100~240v AC power, the blue LED will light, if you use other AC adaptors, make sure the output is 12v DC rated at 2000mA and the plug is positive barrel and negative center type.
Connect your 9v pedals to the EIGHT 9v OUTLETS with included DC cables.
Use the Y cable to connect from any of the EIGHT 9v outlets to get the right voltage for your pedals.( the voltage will boost to 18v under such a connection)
Technical Info
AC to DC adaptor
INPUT: AC 100v~240v at 50/60Hz.
OUTPUT: DC 12v, 2000mA.
POLARITY: Positive Barrel and Negative Center.
ISO4PLUS Power Supply
INPUT: DC 12v 2000mA
OUTPUTS: 9v@500mA (x8)
