I'm a bit limited with my Rample. I like the samples that are in there, particulary when they're quirky, but then I can't combine those with regular drums because I'm stuck to one bank. So I was considering adding something extra. I'm also bumping into the limitations of my Oxi sequencer, or rather the connectivity. With Rample, I'm taking 1 sequencer and 4 trigger outs, but I frequently wish I could free up that sequencer for something else than drums.
So I was looking at drum boxes like the Drumlogue, the LXR-02 (standalone), the Volca Drum, Elektron Digitakt/Syntakt, and others that I decided were too expensive. Several sound good and seem to have great built-in sequencers. Very appealing! Until I realised I really like CVing stuff with S&H or the Joranalogue Orbit. Even when the sound comes out in separate outs, you can only do so much. For example, controlling the decay of a kick drum or tom can't be typically done with CV on these standalone boxes.
On the other hand, there's modular drum machines. The one easiest to compare is the LXR drum module, as it has the same sound engine of the LXR-02 standalone. There's plenty of CV capability in there and it all sounds very nice. But triggering that from my Oxi would take 7 out of 8 triggers. And for some reason, the LXR module has no midi. (Honestly - the one with the sequencer has midi but the one without doesn't...). So either I'm on the lookout for another hybrid drum machine, or I could try and live with the limitations of an in-box experience.
Or I could try something like this! With a 4MS pod, it would become a nice semi-standalone unit that I can CV from my main modular, yet use standalone as well. Does anybody do something like this - build your own DIY modular groovebox/drum machine? Doesn't have to be the Nerdseq, could be another sequencer.
What do you think?