Hi all!
I have just realised my clock divider custom setting generates inverted triggers. Is there a way to move around the jumpers and get inverted gates out of the CST setting without affecting the other two settings instead?
Thank you in advance for any advice
Hi!
you can find info about jumpers position here:
https://doepfer.de/a100_man/A160_2_jumper.pdf
However the Doepfer site say this: so far the custom mode is not yet implemented and for future firmware versions a custom mode is planned that can be selected by means of two unused jumpers (probably inverted gate output mode or inverted trigger output mode)
Hi!
you can find info about jumpers position here:
https://doepfer.de/a100_man/A160_2_jumper.pdf
However the Doepfer site say this: so far the custom mode is not yet implemented and for future firmware versions a custom mode is planned that can be selected by means of two unused jumpers (probably inverted gate output mode or inverted trigger output mode)-- Amenbreak
Thanks for the link, that's exactly why I have opened this thread.
I have tested the custom mode of my brand new clock divider using LED pin jacks and it looks to me they all light up and down as inverted triggers indeed, so I was wondering if someone else knew how to move the jumpers around to get something more useful out of that setting...
