QUESTION: might I be overrunning power on PART of my Doepfer monster case setup? MG shows my rack power consumption is way under max capacity for the case as a whole.
-- nickgreenberg
Careful...one of the standard MG caveats is that the current draw figures aren't always 100% accurate...or sometimes even present!
ALSO...I seem to remember that there was a modification kit to allow you to remove the upper and lower trim panels of Doepfer A-100 cases and install some 4 hp horizontal frames in their place. Can't find it right now, unfortunately, but if you can turn some up, fill 'em up with 4 hp vent panels...or just use some 4 hp blanks and drill as desired. Since these are at the top and bottom of the cab, the normal airflow should draw out the heat buildup in the case.