Yes. Even with the jumper removed though, it looks like you are probably pushing the -12V rail close to it's limits. So definitely remove the jumper, but pay close attention to the lights on the UZeus when it powers on. If they blink when you power on then that means you're probably pushing it too hard. All the lights should turn on immediately. Also feel the faceplate of the UZeus after you've had it on for awhile. If it feels like you're going to burn your finger then again, you're probably pushing it too hard.
You need to get in the habit of looking at the power consumption numbers listed in Modular Grid to give you an idea of how much power your rack is using. Yeah it's just a rough estimate, but in this instance it's 478 mA on the -12V rail, that tells you right away that you definitely need to remove the jumper. Given all the space you have left in the rack, you're definitely going to need more power for that rail when you add more modules. A 4MS Row Power module might be a better idea for the remainder of the rack (it provides more power on the -12V rail).