I have planned my own rack which is linked below, don't take the following paragraph as a request for someone to make me a rack.
Hello. I recently discovered modular and I'm now planning my first rack. I want something to do everything for making some form of psytrance while mostly away from the computer. I've decided on the requirements of ≥2 seperate synth voices, in this case the east beast and west pest because they are cheap and supposedly pretty good, as well as a kick and hats and a way to sequence them, which I decided on the peaks and ugrids modules. I am planning on using a black noise "voltage processor" as a dual vca as I've heared that vca's are important and this was the best fitting module I could find. The cellz and chipz would not cost me too much and add more functionallity, especially with the cellz to have an evolving sequencer when paired with 2 lfo's (kind of, as far as I know it can work like that.)
Speaking of which, due to the low price and ability to sync with my computer, I want to use 2 "NiftyCases." Using the "NiftyBundle," I can get 2 extra oscillators, a lfo, and a sequencer for just $70 usd more. I would be getting the top half of the rack that I made, minus the Erica Synths PICO Out, first as I get the money for the second half. Everything that can't be found on sweetwater or perfectcircuit will be bought on reverb. The only issue that I found in this rack is the depth of the A-199 by doepfer, which I would solve by desoldering the connection ports to the actual spring part of the module that are found at the bottom of the eurorack portion. It's just a simple fix to move the ports and I would go through this trouble because I heard this module is one of the best effects and worth it when just starting out. If it can't be done then I am open to other ideas.
I tried my best but I want to know if it is possible to get more bang for my buck or what I should do differently. There is 4hp left over for another module(s) but I do not know what I would fill that space up with.
https://cdn.modulargrid.net/img/racks/modulargrid_2303785.jpg
I am aware this rack might look stupid, so please look at this patch below for context.
https://cdn.modulargrid.net/img/patches/modulargrid_106845.jpg The mixer on the top would run into the unaffected channel of the mixer on the bottom, because it is already mixed. The top mixer has the 2 drum sounds and the east beast. The mixer on the bottom has the west pest, sampler, and the chipz. The mixer on the bottom runs into the headphone and line out on the Erica Synths PICO Out, which I would not buy on stage one (which I mentioned previously) because the top mixer has a headphone out.
Thank you for reading, any feedback would be amazing and I look forwards to the day I have a eurorack of my own.