Post

i don't think knowing I have that particular module would be relevant to the question, signals are signals no matter where they come from.

it's not about particular modules - it's about balance

for all we know you may have mostly sound sources and sound modifiers and hardly any modulation sources or utilities, you may or you may have adequate modulation sources and not enough utilities... seeing your rack really helps in that regard - I've seen and helped hundreds of people with their racks, over years - but I kind of need to get an overview of what's in the rack in order to give advice... it's a massive aid to thought...

a balanced modular tends towards this:

sound sources < sound modifiers < modulation sources < utilities

& most people at least in the early stages of their modular (the first few years) tend to have very few utilities

the solution for you rack may be remove a couple of vcos and an effect and add more utilties - or add a row and fill it with utilities... but it's impossible to tell without actually seeing it - imo any advice you get without us seeing your rack will be spurious at best

the reasoning is quite straightforward, patch cables go from input to output hence an optimised system should ideally have the same number of these, no matter which modules are included.
I have checked my system and there are 90ish inputs and 60ish outputs, and as because the audio signals already converge into one stereo/mono output (more or less), what's left out is just unused cv inputs (plus maybe one or two triggers).

not all modules need to be used in any given patch and not all inputs and outputs need to be utilized...

i think this is a situation many people can relate to, but I would like to explore solutions other than just stacking and duplicating modulations... for instance rectifiers seems quite a cheap and interesting solution

most utiltities are (comparatively) inexpensive, especially if you go fo doepfer or ladik or similar manufacturers and not instruo!
attenuverters, offsets, switches and matrix mixers are more...

you may be putting undue pressure on yourself to use everything all the time - I have 4 guitars, a bass, 20+ effects pedals, 4 amplifiers, about 1500hp of modules (both audio and video), a few keyboards, some outboard etc etc and amazingly I don't use all of it all of the time - in fact I use very little of it at any one time, at least in some part because it's physically impossible - I just use what I need when I need it...

a note about the ochd: i love the idea behind this module, but i would rather have 4 only lfos but with a reset input and knobs to tweak the frequencies...
-- Dan_ogq

at last something we can agree on! at least to some extent - unsynced modulation sources are great for adding a little bit of movement to synced modulation - matrrix mixers are your friend in this...