Post

with an external drum machine you might want to go with pedals for the distortion/fuzz/overdrive and the compression (to free more space in the rack) and a continuously variable filter - so that you can go from low-pass to high pass and all places in between
-- JimHowell1970

Can you expand on this a little? I am using the TR-8S for drums...will eventually go down the stomp box 'path' as I purchased Bastl Hendrikson a few weeks ago for my Minibrute2/Rackbrute3U setup...but it sounds like using them in line with the TR-8S can also add some flavor to the drums?

-- jb61264

yeah - some pedals in line with the drums - specifically a gain pedal (which will add some compression) and a compessor can add to the drum machine without taking up valuable rack space - and pedals can often be had cheaper than modules (bigger market for them - both new and used) then feed that in to the rack (I'd use a veils - most vcas don't have gain - veils has 20dB there on tap - so can again add more grit at this stage if needed) and then go through a filter in rack - maybe a doepfer SEM or WASP - both of which can go from low pass to high pass on the turn of a knob - this would make an interesting processing chain for a drum machine to me - possibly with parallel processing at some point either before the chain - an ABY pedal is a great solution here - so you can switch between the processed drums and the unprocessed (or differently processed) drums - this is especially useful as distortion pedals have a tendency to loose low-end - so maybe take this into account when choosing a distortion pedal - maybe something specifically designed for bass processing

the hendrickson is a great idea for sending stuff from the rack into an effects pedal chain and then back in - especially things like delays and reverbs can be used so much earlier in the chain than usually and then brought back in - possibly for further processing - filtering for example

an envelope follower (or 4) is also really handy to have at this point - as are more vcas

I think you'll be wanting to expand the 3u to a 6u soon - try to keep the 3U - if you can - always good to have space to expand into!!!