Hi guys,
As I'm new to the world of modulars, I've just bought a beautiful case from Eowave (https://www.modularsquare.com/fr/shop/eowave/6u-studio-case-104hp-power-supply-2/).
After all my modular dreams had finally come true, a few problems brought me back to the harsh reality of all the technical adjustments to be made before actually making music.
The source of all my misery is a noise that is present all the time and is loud enough to be heard on the recording. I've tried various things to remedy this problem:
1) I changed my speaker cables so that they were balanced.
2) I then thought it was a ground loop problem. So I bought a box (https://www.amazon.fr/dp/B0CQC7P7WD?ref=ppx_yo2ov_dt_b_fed_asin_title) that reduced the noise. But it's still there.
3) Then I thought the noise was coming from my old mixer so I bought a new one. It didn't change the problem.
4) Finally, I'd been told that the Eowave power supply that came with my case (https://modulargrid.net/e/eowave-source-d-energie) wasn't great quality and could be causing noise. So I bought the Behringer CP1-A power supply module (https://modulargrid.net/e/behringer-cp1-a). But the noise is still there.
I'm running out of solutions to this problem and I'm beginning to despair.
I know the problem is with my modular system because the other machines I plug in and record are not producing any noise. I've also made sure that I respect the limitations of my power supply.
If you have any idea what it could be, I'd love to hear from you.
Cheers,
Hoggres