Available as an assembled Module and as a DIY project.
This Module is currently available.
Designed mainly for CV but will work fine with audio.
Each Channel has a 45mm control fader with LEDs indicating the voltage level.
Red is positive voltages, yellow is negative. The LEDs will follow the voltage of whatever runs into the input.
Each channel is connected to 5V when nothing is connected to the input.
The Mix output sums all channels together, patching a cable into the one of the outputs will remove it from the mix
The buttons at the bottom select whether that channel is an Attenuator (0-5V) or Attenuverter (-5 to +5).
12hp wide and ~30mm deep with power connected.
2 Users are observing this
