OK...MG's screenshot function seems to be smokin' rocks again, so let's see if this sucker posts properly...
Yeeeahhhh...it's being pretty hateful. At least there IS a link there...
OK, what I did here was to trash a lot of redundancies and whittle the functionality a bit from your prior iteration so that I could drop more RAW POWER into my redux. MIDI interface and sequencer were dropped in favor of a Squarp Hermod, which has both and which does way more. Tempi was dropped in favor of a Pam's; you might want the extra two channels of trig sequencing. Zadar instead of the dual ADSR and the Erica EG/LFO, Quad VCA instead of the discrete dual VCAs...you lose two, but gain some extra mixing capability for either audio or CV (or both, given that you can split out VCAs in it).
Listen I/O was scrapped, and I separated the audio in and outs into separate modules, both located where they should be. You'll also notice that the Happy Nerding OUT has a separate stereo input, which you can use to put the Mimeophon in parallel routing, instead of having to route everything thru it and control the result with the wet/dry control. The Doepfer A-119 also now gives you an envelope follower...very useful for incoming audio, as you can now use the incoming amplitude as a dynamic contour (or most anything else CV-wise). Buffered mult, yep...normally, I'd say keep this OUT, but in this case the build IS moving into the turf where this is needed. And WHY...well, that's next to it: Squarp's new 4-channel sample player module. Then the other new device is a 6-in stereo mixer, with CV over either level (your dedicated audio VCAs) or panning.
Layout was regrouped, and the functions were split between rows: audio UP, CV/mod DOWN.
...and the cherry on the cake: I managed to mash it down another $300, even with all of the hi-octane additions. :-) So, how's that?