Ah, good...you have a Boolean module. Try this: send two gates into an AND gate, but delay one of them. The result will be a gate that's only open when the two gate signals are present...otherwise, nothing happens. This gives you a THIRD gate signal that you can route where it's needed. Or use one gate in, but take the other gate input out of something faster...and then, you can use the gate delay to "slip" one of the gates back and forth over the other one, resulting in the ability to shift rhythmic patterns via delay adjustments. Lots of abuse potential...but keep in mind, the gate delay really does require the delayed gate to be sent on to something else that can interpret what the delayed signal does vs. an undelayed gate. In of itself, it's NOT interesting, no.
And one caveat: Arturia lists the Rackbrutes as holding 88 hp per row, and this should match up 1:1 with the size of the synth's control panel. It looks like you might've built this around this rumor that the Rackbrutes hold 89 hp. This just isn't true.