Hi, 0-ctrl is a pitch and gate sequencer, and it has a main clock output, but I think that you will need a clock divider to handle this output. I'm using Arturia beatstep pro as a external sequencer and main clock output its soooooooo fast. I don't know 0-ctrl specifications in this point.
BR
-- ferranadsr
probably set to 24ppqn - you should be able to change it with the control center software...
but that's quite good in lots of ways - start with a very fast clock and divide down to whatever you need from there... much more accurate than mulitplying up - as dividers work on counting every nth trigger and multipliers have to use guesswork - divisions of time between clocks - so feed them a wonky clock and the divider will follow it perfectly whereas a multiplier will only ever be as good as the last 2 triggers received
"some of the best base-level info to remember can be found in Jim's sigfile" @Lugia
Utility modules are the dull polish that makes the shiny modules actually shine!!!
sound sources < sound modifiers < modulation sources < utilities