I'd watch out for power with this (see other thread re 'electrical concern') - those go cases are a bit under-powered in my opinion and there may well be inrush issues with so many digital modules (at least 12 of the modules in this rack are digital at a quick glance)
I'd strongly suggest creating an abstraction of this case with 1 row per +ve rail power section - go to the bottom of the sheet view and you will see power consumption per row - or in this case per section of the +ve rail
this will enable you to see the distribution of power better - leave at least 30% free on each of the zones and each of the other power rails (especially the -ve)
if there are still inrush problems then either adding a rack wart psu or experimenting with inrush delays are going to be the answer - wmd make one
"some of the best base-level info to remember can be found in Jim's sigfile" @Lugia
Utility modules are the dull polish that makes the shiny modules actually shine!!!
sound sources < sound modifiers < modulation sources < utilities