Upon further investigation I think you're right. I connected the gate from the KSP into the cv input of the VCA, output of VCO (saich) into VCA input. VCA stays open with the signal from Saich, note on and note off from the KSP works, but it's on top of the open signal from Saich. If I reverse this and connect KSP gate to VCA input, and VCO output to VCA cv input, no open signal from saich and note on works, but when I release the key note on happens again... hope that makes sense
-- TheSoundGardxn
in that case I would try to find a thread on modwiggler regarding the vca - this may be a known issue - is this the v1 or the v2?
"some of the best base-level info to remember can be found in Jim's sigfile" @Lugia
Utility modules are the dull polish that makes the shiny modules actually shine!!!
sound sources < sound modifiers < modulation sources < utilities