Hey, Doc! It looks like your post has been left out here with us crickets.
My Experience
I've been experimenting with eurorack modular for a little over a year now. I have two travel cases and a skiff I use. You can see my setup on my account (current system #1 and current system #2). I am in the process of rearranging my gear and selling off some modules which I hate to part with but they don't fit into my rig anymore. :-( Like Rossum's Evolution filter is a really sweet module but it's out of place for me now. You can check out my planned rig which is Erica Synths Rack v4.4.0 (horizontal arrangement). I also have a Dave Smith Instruments Pro-2 which I'm crazy about. LOVE that keyboard. Very well thought out. And a Nord Lead A1. That last one is a great keyboard synth to learn on. It helped me a lot. The Pro-2 interfaces with eurorack modular very nicely.
Your Question
If this is your first system, you have quite a mishmash of modules. It looks very much the way I started out a while ago. I had no idea what I was dealing with. However, I quickly learned how expensive modular synths can be! If you're interested in ambient sound and sound shaping to start, then you really only need an oscillator and an output module. This isn't very practical, but it can work. Let's take it a step further. I would add another oscillator or get a dual oscillator module. I see in your "I don't know what I'm doing" rack you have the Batumi and the Deeper A-111 which can work. Alternatives to this are Make Noise DPO, Erica Synths Black VCO and Expander, Mutable Instruments Braids. I highly recommend any of these modules for a sound source. Good quality and keepers.
The reason two oscillators are more fun (in case you don't know) is because you can play around with signal beating where two waves of same or different shape are near each other in frequency or an integer multiple of each others frequency. Very good for ambient.
Basic Signal Flow
By the way, since you are new to all this, the basic signal flow goes like this: (oscillator) -> (optional filter) -> (VCA) -> (optional filter) -> (optional mixer) -> (output).
The simplest pathway is (oscillator) -> (output).
A step up from that is (oscillator) -> (VCA) -> (output).
Modulation can come into any of these paths at any point. You can use an LFO for oscillation or another sound source. In fact, you can do pretty much whatever you want, just try not to put an output into an output. Many better modules are protected against this though.
I see in your rig that you have multiple low frequency oscillator (LFO) sources. You probably have too many. The MATHS module is excellent. But it's complicated. It is not so much how it works but what can be done with it. Exploring the MATHS module to fully understand it is a small job. But very worthwhile. The Make Noise manual has some excellent exercises to try. Even better (from my experience) is find someone that would be willing to walk you though it's operations and teach you how to use it not just how it works.
Voltage Controlled Amplifiers (VCAs) are important if you want to shape the sound by volume. And you will. However, for every VCA you will likely need an envelope generator (EG) or LFO. Typical envelope generators are AD or AR, or ADSR. Let me know if you need clarification on what these are. I see you've selected the Doepfer A-131 and the Intellijel Dual ASDR. These can work for you.
The Pressure Points module is also a good idea. It is a great learning tool and is fun to play around with. It can be used for control voltage (CV) or pitch information (to a sound source). With multiple oscillators you can play three note chords.
Wrapping It Up
If you are interested in ambient sounds and such, then I would forget about most of the modules you have in your rig. No sequencers yet, for example. (That means you would have no need at this point for a clock or clock divider.) Stay with the basic signal chain and learn how things work. It's a steep learning curve and you won't benefit from making it harder on yourself. That's my two cents.
One other thing I would recommend adding because of the joy/fun factor is a reverb and delay module. I have used Erica Synths Blackhole DSP, Make Noise Erbe-verb, Synthesis Technologies E580 mini delay, and the Expert Sleepers Disting. I would recommend the Blackhole and the Erbe-verb most for the money. And I completely forgot to mention the Disting a while back. I recommend looking into the new Disting module by Expert Sleepers. It has delay and reverb functions. It is not any easy module to work right out of the box (Os loves to be cryptic, I think. And he programs in his sleep :-). The new mk 4 disting is more accessible though. And it has many functions that can teach you what other modules you might like to spend $$$ on in the future. For example, clocks and clock dividers and sequencers. And it can convert midi files to CV and play audio and granulate! In fact, the Disting modules are also a small job. :-)
So, my final thoughts, since you asked, are start light, learn, and build up saving your $$$ for better more meaningful modules as you gain experiment and start putting A and B together. $4000+ is a lot to spend if that is what you are thinking. If it were my money, I would want to make it count. Then again you could always purchase a gorgeous acoustic guitar for $36,000. Heck. You could spend that much on a drum set!
I like to share what I learn. It helps me learn more. So, if this has been helpful to you, please...ask questions. I will do my best to point you in the right direction.
alex (lexi000)