Post

as for sending the reset signal to multiple modules, a passive mult (or stackcables, or headphone splitters) should work perfectly, it's a bit of a waste using the buffered mult from links - better for pitch (and potentially if you are re-patching triggers on the fly)

thanks for this info...separately I have an Intelijel buffered mult (no passive mults in my setup) so i will just use that for any gate to Varigate 4+ and Bloom...but also need to get one sent to my separate 3-tier Moog setup...does the signal for a gate diminish in strength if you 'mult' it out too much?

(pams is set up to reset by logic not sending a clock for a while and then receiving one)

how does this work? receives one from BSP?