Hey everybody who's following this
Thank u @Kel_, JomHowell and Lugia
The problem is the noise or peep is clearly in the signal chain.
if I use it as a comb filter or pitched delay the same happens with the peep, also its also there when turned fully dry, or in case of the Vermona out, also when its turned down . Same with the intellijel 64 case from my girlfriend.
so the father of my girlfriend (he's far away in russia) who is an electro engineer said one problem could be our electricity at home. He suggested Tension compensation or Power Conditioner or Isolation-Transformator, ( I don't know the right term, he's Russian, I am German so there is a double translation). smth like https://www.amazon.com/Tripp-Lite-Isolation-Transformer-Outlet/dp/B00006HPFH/
(f**k amazon)
or this
https://www.thomann.de/de/adam_hall_pcl_10_pro_power_conditioner.htm
it could lower the noise a bit...
The other pilot is the grounding. He said my case or few of the modules could have lost the grounding, as I just moved in, maybe there is a truth behind this. Or from the livestream performance at an other place idk..
also: i have stumbled across some similar product as Lugia described.
https://www.perfectcircuit.com/trogotronic-m-05-silencer.html.
Its sold out so I will try what Lugia posted. Do You have any experience with it?
The search continues. I am kind of a neurotic person now I am way more aware of the noise (and high Pitch tone) my
Morphagene has and the noise level the data bender has. xD its driving me nuts
A friend of me has a mutable beads by himself and a intellijel 104/ 7u (Bought 2018 as mine). He has found the same freq but way quitter is 4032 Hz. SO IT IS A GENRAL PROBLEM WITH THE BEADS AND THE CASE. But he said he could live with it mine is much louder, as he has heard in recordings I've sent him.
I´ve taken my beads and case to the studio I work at rn there is another beads too, but in a huge doepfer case.
Same frequency but way way quieter. I switched them, put mine in the rack. same freq but way quiter. So something I could live with.
had no time to listen to the other one in my case. But mine in my case had the same problem in this studio, so its no problem I only have at home.
Here a recording of a plaits going into the beads:
https://www.dropbox.com/s/sdovpdyr1lyb6bn/IMG_2098.jpeg?dl=0
here only beads input is just from Xpan so the cable is not floating around and hums (same with an empty input from Optomix, maths or a Plaits with cable to the trigger in but not triggering)- U can hear how the beads pics up the Ground noise and it goes in the signal chain.
https://www.dropbox.com/s/zoufj702puip2xv/beads%20quite%20xpan%20as%20input-%20acting%20as%20delay%20.mp3?dl=0
Humm and noise from the Data Bender
https://www.dropbox.com/s/f41u8x1fetzg477/Humand%20Noise%20from%20the%20Data%20Bender.mp3?dl=0
next thing I will do is to test a doepfer a 100 case, with the modules at home.
Linear Power Adapters are a thing to:
But the could modulate oscillators and they are huge.
Maybe that's an option too
I think I will have to write Emelie from Mutable and to Intellijel. :/
best,
Johannes
j.manuel