outputs to modulation inputs on other modules
adjust attenuverters to set ranges
turn knob (or use input - use attenuator as needed) to change value at output...
imagine the attenuverter for output 1 is set to about 9 o'clock - roughly -0.5
as you move the knob from fully counter clockwise (0) to fully clockwise (1), the value of output 1 will move from 0-> -0.5
etc etc
"some of the best base-level info to remember can be found in Jim's sigfile" @Lugia
Utility modules are the dull polish that makes the shiny modules actually shine!!!
sound sources < sound modifiers < modulation sources < utilities