Update time. I had some time to work in the garage.
Here's the wood in the messsssy ass garage.
http://prntscr.com/kcblpv
Here's all the parts cut out, with the little paper templates still glued on.
http://prntscr.com/kcbm2n
Parts glued up and sanded, now I'm out in the hot sun putting finish on.
http://prntscr.com/kcbmea
Ok. Finish dries really fast in 100F.
Now let's load some modules into it. Here is the mostly-finished box side by side with Sub37.
http://prntscr.com/kcbmmw
My favorite feature of this case. The back panel is removable so you can tinker more easily, I put M3 screw mounts in.
http://prntscr.com/kcbn2t
The power supply section of the build is still waiting for key parts in the mail. So once those arrive, I'll add a power-entry port on the removable back panel and mount up the TPS80 and BUS to the baseboard (which I also made removable via threaded inserts).