Update: I have the older manual now, but the midi input port is still not responding to both midi messages and sysex file transfers. I can exclude some causes with my cable management, since the midi out is working fine (sending note and gate data, tested on laptop's midi in monitor and the midi in on one of my synths - this works like a charm!) Things I have tried to find out what the problem actually is:
- The midi to cv mode (powering on while holding the left arrow key). This is not working, but it might be helpfull to say that when the module is powered on in this mode, the CV1 output moves to approx. +5.24 volt, except when voltage mode is set to 5V unquantized, then the CV1 output moves to approx. +1.92 volt. CV2 moves to +5.24 volgt and gate2 to +4.45 volt.
- Booting into the firware update mode (powering on while holding reset key). The two left ligths are red but nothing happens when I send a sysex file (both the A & B files)
- Different midi to TRS adapters (the one provided and adapters from 1010music, arturia and Empress effects)
- Flipping the mini switches on the back of the module - I've tried all four combinations
- Two different midi-usb interfaces