All Posts

I would seriously suggest a slightly different approach

1 - bigger case - in the long term cheaper and less physically constraining - you do not need to fill it ever, if you don't want to
2 - get something smaller and simpler than the shapeshifter to allow you to get the modules that you actually need - this will also allow you to spend more time ;earning to use a modular then learning to use a super complex module - I'm not saying don't buy it - I'm just suggesting not yet

just get the following - it'll be a better learning experience for you I think:
a sound source - something relatively cheap and inexpensive is good - the dreadbox chromatic one for example
a sound modifier - a filter is a good - and going out to a H9 will add delay and/or reverb I think
a modulation source - modular without modulation is pointless
a way to listen - yeah you have that in the palette or whatever it is - but if you have a H9 you probably have a mixer - use that
a way to play - you basically need one of midi interface- for DAW, sequencer, midi keyboard -personally I would go for sequencer - so you can wiggle whilst a tune is playing - just get something relatively simple to start with - although clock and gate outs would be useful

on top of those some utilities are good to have - I like links and kinks from mutable instruments - a disting never hurts and you already have a quad cascading vca so keep that in there

Are you voting them as negative? I thibk this feature must be used appatt from this thread, because some people doesn’t know that modulargrid is also a forum!

I would like to suggest one more module.
Befaco PowSkiff

James

@SteveLate is being scummy and has ignored several of my messages even though I know for a fact he's been on the site couple of times since I sent him 500 EUR for a Bitbox.

I also know for a fact that he did the same with other people and doing it right now.

If he does not answer soon, send my money back OR send me the module, I'll have to pay him a visit in person, cuz it's not a good idea to scam someone who's 2 hours away from you while all your info is public and easily traceable.

I have waited long enough but decided to post this because he still sells things and has no trouble answering other people he hasn't scammed yet...
-- breakline

+1. it was all cool until i sent him the money, after that he disappeared.
@SteveLate you better pay us back

EDITED Apr 25th 2020, 00:06

@SteveLate is being scummy and has ignored several of my messages even though I know for a fact he's been on the site couple of times since I sent him 500 EUR for a Bitbox.

I also know for a fact that he did the same with other people and doing it right now.

If he does not answer soon, send my money back OR send me the module, I'll have to pay him a visit in person, cuz it's not a good idea to scam someone who's 2 hours away from you while all your info is public and easily traceable.

I have waited long enough but decided to post this because he still sells things and has no trouble answering other people he hasn't scammed yet...

Hello, yes, I purchased one of these units at the start of mid April from Thomann and I'm experiencing exactly the same problem.

An annoying and audible noise floor introduced when the DRY/WET knob is turned to WET.

I've tried everything to reduce it, lowering the gain and also clearing the feedback when changing presets - but it still happens.

A little frustrating. I have contacted Intellijel and will update when I have more information.

EDITED Apr 25th 2020, 11:08

I just had great purchasing experiences with @rsillsley and @fredeke - can recommend both of them highly

Saw this set up being played by Ian himself on the Superbooth HE 2020 stream!
Great!

Intellijel Outs

Maybe I'll take a look on small (BIG) modules which can supply VCA and ADSR functions. This will optimize your rack space.

Polaris is a very good filter with lots of modes, which is ok. I think that VCOs and Filters are something very personal and it depends on needs and what final user likes.

I'll go for Nano Modules ALT and Nano Modules QUART, respectively.

ALT has 4 clear VCAs in only 8 HP, so you're saving 4HP. Q
QUART are 4 AD-Looping envelopes, which can act as LFO too an, again, in only 8HP.
We have now 8HP remaining and, we can add Transient Modules 8s as a sequencer (little sequencer, but very funny and powerful).

You can find an sketch of how your rack should be with this changes. Just CLICK HERE and you can take a look on it.

I hope this helps you.

Hello everyone!
After making multiple designs and watching hours of YouTube videos about Modular, I have finally come up with this setup.

I already have a decent amount of VCO synths, so I decided that a digital FPGA would be different. Also, looking at the videos the Shapeshifter looks to be very deep, and I dont really care that it came out 6 years ago. I am hoping I can use OSC 1 as a sound source and OSC 2 as an LFO.

Not too sure if I need the ADSR, I still think it could be useful, but if Im playing from an external keyboard maybe not.

The only thing that is bothering me is not having LFOs, Sequencer, and Effects. The Shapeshifter can be used as an LFO I guess. I will have to use external effects like the H9.

I do what to keep this small as I really want to learn with limited pieces at first. I'm pretty confident that this setup has all of my "needs" down and can substitute my "wants" with external gear to learn what I want once I put together a bigger rack.

thanks for your time guys and I would be grateful of any input!

Hi Benneb,

Looks like it's not ;-) I got the message "This video is unavailable."

Kind regards, Garfield Modular.

I’d love to see the Intellijel 1U modules I/O 1/4 Jack that goes with the I/O 1U and the 1U MIDI Jacks that goes with the uMIDI 1U. A black Atlantis would be awesome too! Also, I would like to have a Five12 Vector Sequencer with its expander in black! Please please please!!! Thanx!

https://cdn.modulargrid.net/img/racks/modulargrid_1187541.jpg

bought from @akaroid
great seller, very friendly and really helpful. you can trust him! :)

But doesn't that change the default image for everyone? While I wished people would stop adding separate "whatever panel" versions to the database, I'm not sure the current implementation is sufficient. Or am I missing something?

EDITED Apr 23rd 2020, 05:59

Yep...the MIDI is relatively basic-ish on the AE's MASTER, but it can still do lots of crazy things. To accomplish the really wacky stuff, though, I'll be relying on CV Tools. Even though we don't have any solution like the Expert Sleepers stuff (although, you CAN use their Silent Way software for this same voodoo, too) in the AE environment, it's still cheap and easy to get a used DC-coupled audio interface off of eBay or Reverb, hook that puppy up to the DAW, and make the magic happen that way.

Hi Hedgemunkees,

Nice album you got yourself there! :-) I specifically like those longer tracks with the topper being "Pacs (Main Mix)", it goes on and on and it just can't go on long enough for me :-)

What are you using for the drums? Everything else by modular? Also those voices in track "Head Related Transfer Disorder"?

Thanks a lot for sharing and I look forward in more exciting music from you! Kind regards, Garfield Modular.

try changing the power connector for your module. I had a few modules i thought had failed me when in fact it was the power connector.

I got the power consumption from Matthias Herrmann (the guy who makes this lovely module) and they are:
+90mA
-40mA

Got me a Furthrrrr Generator from @ak47exe, and yeah !!!
Last year I bought an Erica Black Octasource from him too.

Both modules were pristine, and the communication was good.

EDITED May 3rd 2020, 16:54

I wonder how well the Zoia euroburo would play with that master AE module. Doesn't the Zoia have midi control modules on board along with midi in and out? Take a sequencer from a euro module and route it to the Master module with the Zoia, letting the Zoia handle notes and octaves?

I had forgotten the I/O automatically handled voltage levels. Guess I just wigged out a bit there. Shoulda known that

In the AE environment, you MUST constrain signals to a 0 to +5V scale. It's just how the system works, probably due to part of its origins being in Stanley Lunetta's design work. Now, to get signals in and out, that's what the 4I/O modules are for...they do all of the voltage voodoo. But if you want proper scaling, that will require the MASTER and its MIDI interfacing, since the AE also isn't exactly 1V/8va.

There's also a second solution, especially for CV/gate/trig signals, and that's Soundmachines' Nanobridge. That was designed for their Nanosynth...again, some Lunetta ideas in there...and costs a whopping $40! w00t! This provides 14 channels of bidirectional I/O for control signals (primarily) and when you use the AE's +5 and GND as its references, it will autoconstrain things to the proper range.

I use all of these, btw...pitch CVs via the pair of MASTERs, audio I/O via a pair of 4I/Os, and a Nanobridge for all of the other stuff. I can also drive my AE system via Ableton's CV Tools thru a used/cheap MOTU 828FW mkii ($120 on Reverb), which is capable of dealing with the voltage scaling issue and can give me eight simultaneous channels of scaled CVs if I should need that.

EDIT: You (and others looking at the AE, of course) might find even more answers over at their forum, which you can access via their site at https://www.tangiblewaves.com/ Lots of knowledge flying around there, including some tasty DIY action (company-encouraged, even!).

EDITED Apr 22nd 2020, 00:48

V.Oct1 goes to CV
Maths Trigger to Gate
SSF Autodyne to Audio Out

https://cyberneticohm.bandcamp.com/album/pillars-of-creation-album

be sure to check out our back catalogue > cosmic modular synth electronica

I would also like to highly request that the
“ Intellijel Planar 2” be added to your Black and Gold panels please.

Additionally I would also really like to see the “ Dave Jones Design O'Tool Plus Oscilloscope” be added to your Black and Gold panels please.

I have questions:
1) Is there anyway to tell when a module that has been requested becomes available, like maybe an email notification?

2) What is the cost of these Black and Gold faceplates?

3) How do we order one once it is available?

4) Also I’m wondering is this request page still alive? When I look at it without being logged in I see others request but not mine.
The only time I see mine is when I’m logged in.

Best Regards,
James

EDITED Apr 27th 2020, 16:05

Not personally, but I am 100% sure this happens quite a lot, I am a big fan of doubling up on modules and have doubles of quite a few!

Why over your head? If you can use one Maths, you can use two :)

I guess it also warrants asking, am I barking up the wrong tree? I really like fat, dark, warm synthwave tones like Lazerhawk, Malo, Power Glove, Carpenter Brut, Magic Sword, etc, etc. It seems like, at least on Youtube, the majority of patches I see are things like house, trap, techno, ambient, experimental. Not very many synthwave patches. Anybody have any experience with making Synthwave on a modular? I'd think an AE with an Arturia would be as good of a place to start as any, but I'm hesitant. Should I start with my idea for an AE and a Keystep? or perhaps go for an all in one Korg or Behringer? I just hate the thought of losing the ability to shape my sound with a guitar pedal or an effect in the middle of the patch, just not at the output. EDIT. Isn't crippling self doubt just the greatest? At lease I ain't suffering from Dunning Kruger!

EDITED Apr 21st 2020, 08:36

The work on the existing 1U Intellijel pantels is awesome. It will be great to see more 1Us like Radio Music by Music Thing Modular, 1U Steppy, as well was some 3U modules that can be flipped to 1U

With a bit of extra income coming in from multiple sources, I'm really considering taking the dive, but i have some concerns. I'm thinking about getting basically the AE modular starter rack 1, rehoused in their 16u eurorack adapter, with a few changes and putting that in a Tiptop Audio Mantis for future expansion, along with an Arturia Keystep. I understand that the AE system is limited to 0-5 volts on CV, is it also limited to 0-5 volts in it's audio signal? I don't want to plug in my guitar or, say, a line of One sample players and blow up my AE system. If it is limited to 0-5 for Audio, what would I do to step down levels simply? Would I use a VCA? Is an audio signal's voltage the same as it's amplitude? like instrument level vs line level vs modular level?

Thanks for the feedback and your link, listening to your album right now and I like what I hear :) Branches is still with me :)
Cheers, Gabor

Oh how curious!! Looks like we both released full albums on the same day... I wonder what the chances are given it is only a few weeks since we were taking about Branches - hope that's working out okay for you :)

Listening to your LP now and enjoy it so far - cheers :)))

Wow, never even saw that feature existed, thanks for pointing this out mode_analogue! That's much handier for sure.

not sure, but i believe your request is actually implemented in the current rack browser already.
if you look at the top-right there's a collection of tabs, one of which reads "Panel Selector On/Off". if activated, you can browse all available panel versions for that one module (when hovering your mouse over the desired module) and settle for the one you like most (or the one you're having) by clicking on the arrows. at least that's what i always do.
if a specific panel version is missing for the module in question you could just add another picture yourself to this single master entry and that way the database is not getting clogged up forever with countless versions of one and the same module.
just give it a try and see how it works for you;).....

Hello,

I'd be very handy to have the ability to easily duplicate a module if one wants to, for instance, create a 2nd version of a module with an alternative panel (or colour) without having to recreate the module from scratch and fill in all the details again.

The handiest will be to add a duplicate button on the module edit page to instantly create a new instance of the module that is all pre-filled and one only have to change, say, the picture.

Much thanks!

I know I'm getting in way over my head here but...has anyone used multiple Maths modules?

Hey Garfield Modular,

Thanks for your feedback, glad you listened to and liked some of my tunes. I recorded all the tracks with my modular rack + a Nord Drum 2, which I triggered with either the Just Friends or Pam's New Workout.
And for sequencing I primarily used the OP-1.

Thanks again!

Cheers,
Gabor

EDITED Apr 20th 2020, 05:53

Where are the Intellijel racks?

Hi Aphew Goodman,

Thanks a lot for sharing this. For some reason when I clicked on your link, the music started to play with the track #4 "The Tribe", a very nice and impressive start! I love the creativity in track #3 "The Merry" and track #7 "The Welder is a pretty high energy track ;-)

Perhaps most interesting is your track #8 "The Anti", full with nice and interesting sounds!

Well done! I wish you good luck with making music. Personally I wouldn't mind to hear more of The Anti or at least music into that kind of direction but that's just my personal taste.

Oh yes, have you done all with a modular system?

Kind regards, Garfield Modular.

Make Noise Mysteron & MMG

The module posted by this user (balpirol) is not a Livewire product.
Information on the official product in development by Livewire can be found here:

http://www.monorocket.com/2020/01/09/flux-capacitor-update-9-jan/

steve R
monorocket.com

For what it’s worth, be mindful of the space adjacent to the power module. You can only place very shallow modules within 4 hp or so of that location, with the Quad Envelope manual saying it is 26mm deep (not counting connector placement, which can create problems even for the most shallow of modules there.)

This is definitely one of the things I’m least happy with regarding the Rackbrute, along with its angle adjustment being more limited than you’d assume (and actually more limited than what is shown in the manual!) :/
-- mvdirty

Thank you for your feedback!!!

Well, for one thing, this build is a bit too small to support two sets of mults. You might lose the 1U mult, as it's easily replaced by using inline mults or stackcables. Keep the Links, though.

Ears. Why? The Intellijel has external inputs, and you've got the stereo tile for it. If the idea is to have a "controller"-ish thing, then there's a few options for that, but the overall build seems deficient on LFOs. "Generative" tends to imply a lot of automated processes, and LFOs are the best way to generate cyclical waveforms that can work those. Removing the Ears and then dropping in a Doepfer A-145-4 gives you four of them under manual control.

But one caveat: generative composition tends to require a considerably larger build than this. I'm not saying it can't be done...but I am saying that trying to do that in a smaller build will be a bit frustrating since you don't have the modules to establish multiple signal paths. This can be especially true if you're doing ambient work, where one of the important musical factors is the variation in timbre between voices spread out along the timeline (see Eno's "1/1" for an example here). You might consider a bigger case to start with if you're sure that this is the direction you want to go in. So far, everything seems pretty decent...save for that build size issue.

Hey guys!

I'm pretty new to all of this but I'm super interested in developing an ambient-focused setup. I'm planning on getting the Intellijel 7U performance case for the connection capabilities and portability. I've been watching a bunch of videos about Eurorack (ambient and general) and have tried taking notes on what makes a "complete" setup, but I have never done this before and would absolutely love any advice on my setup so far and how to make it better! I know Clouds is discontinued but I've already got one (it's the only thing modular-related I own!). :)

Thanks so much!

EDITED Apr 18th 2020, 22:18

Senor-bling,
I just tried what you suggested and it is the same very high pitched whining.
Thanks for the advice anyway

Since the first and last cases have dedicated output modules... does the high-pitched whine also appear over headphones when the cases are not connected to anything else? Do you have the whine in a different room (or outlet) as well?

my latest release, made on my rack

http://aphewgoodman.bandcamp.com/album/new-forms-of-dance