Hello! Thanks for taking a look at my rack!

As the title says, I'm trying to build a rack to create warm, luscious, droning soundscapes.

Lots of effects, layering and textures are needed and a little bit of sampling capability.

I'm very, very new to modular/euro rack so I'm not entirely sure what I need and I don't know if any of this is redundant.

This is an ideal or dream rig but I certainly don't plan on getting it all at once, just a base to start from and figure out what's needed, what isn't needed, if there are crucial modules to make it work... or even if it will work at all!

Anyways, any help on building a rack as I previously described would be wonderful!

Thanks again!

Bryan

Problem is that most modules don't have that flag attached and are listed under the Property unassigned label.
We should make some kind of community data sanitation event to complete the data at one point...

Thanks dsclerc.

There is a field "Product Lifecycle" that allows you to mark a module as discontinued. Use that. You can even filter on it. It was created for that exact purpose.

No . Modules comes with their power ribbons.

Hello

This is the rack shown in the Moog Eurorack Case 60 HP image on their website. What do you think? is it a good companion to the Moog Mother-32? Thank you.

Hello,

I just want to know if I must list the cables to plug the modules to the power rails in my shipping list.

Thank you for helping.

Hello,

Please give me your opinion about the Raxperimental, a set-up for experimental/acousmatic music sound design.

Ne need to synthesize basslines or killer solo sequences here, but a configuration as open as possible. The openness is also translated into one analog sensor input module, an envelope follower and a MIDI module. There's no module to get audio from a computer because we have a sound card with DC coupled outputs.

Anything obvious missing?

The beast is here.

Thank you in advance.

Hello,

Any recommendation for an alternative to this VCO with modulable waveform, large number of octaves and FM?

Thank you in advance.

@phinland
Excellent buyer. looking forward to deal with you in the future again.

Thank you for the guidance.
-- koreyluna

Glad to be of help :-)
Ask more questions when needed.

EDITED May 9th 2017, 13:01

Thank you for the guidance.

My brilliant 4ms Spectral Multiband Resonator just arrived from @Infiltrator - lovely guy to deal with, lightening postage, all tracked. Trade with complete peace of mind. :-)

Occurs to me:
- you have no PSU/converter module
- there is no mixer, have an external?
- there are no envelopes/vca s so everything will drone

Hi, you now have one case 12U x 84 HP ? And want to expand to 18U x 84 HP?
Add another 6U x 84 case to put on top with appropriate PSU.

I'm speculating, as I have yet to build a Eurorack.

chiming in, @phinland very nice contact, quick and uncomplicated!

ps: i changed my name from penrose_riots to goldeg. quite a few over her on modgrid bought bits from me, and might also have left some feedback...

Hello

Iam limited in 4 Row 84hp, have you need details please for add 6 ROW?

regards

Lou

Dear all,

I have a website which sells synthesiser t shirts.

Would people be interested in having a picture of their rack(s) printed onto a premium organic t-shirt? Just trying to see if there would be interest in this or not. I could create a product and you just email us a picture of your rack (a screenshot is fine) after checkout.

My website is www.future-past.co.uk

An example is https://www.future-past.co.uk/blogs/news/modular-grid-print

Thanks for the advice.

Cheers

Dean

Unicorns can just add .xml or .json to the end of the URL of a rack.

e.g.
modulargrid.net/e/racks/view/223662
->
modulargrid.net/e/racks/view/223662.xml
modulargrid.net/e/racks/view/223662.json

Not CSV but maybe a useful workaround?

Thanks, both formats are useful. Doesn't work with private racks, but I can workaround that too!

Version 2.0 of gargoyle delay module. New pcb with smd components and great new front panel.

EDITED May 7th 2017, 20:02

Hi,

I'm very new in modular and i am planning to buy a new setup.
i already own a few things.

I have:
System 1m
Korg ESX
Roland aira tb-3
APC-mini for ableton
Make Noise 0-coast
and a few others that i will sell

In my new setup i will still use the Korg ESX ( i love the sound and its my first sequencer/synthesizer.
I also will still use Ableton because it gives me really fast variation in sounds. i use it for some drums samples and single shot samples. The Roland aira tb-3 i dont know if i will still use it but in the beginning i will. The Make Noise 0-coast can i build in the new rack as a module.

EDITED May 6th 2017, 17:49

I can concur - phinland great to deal with. Trade with confidence ;)

Hey isgotekmusic,
thanks for the posting. I will definitely check out the modules you have in you rack.
As for the stuff I am doing, check ou my soundcloud page with songs I have written alone or with my co-writers. Some only very rough demos or mere sketches, some full productions. Some of them have been released by other artists, some are on my 2015 CD "Camerado" (fully produced in ableton):
https://soundcloud.com/jewe123
Enjoy!
Jens

Hi there!!! It's funny cause yesterday I started creating a rack exactly to assist 2 moog mother 32.
Here it is!
I am a pop music producer if you are looking for one =) =P
Cheers!!

Hi Community,
I am a (singer-) songwriter and I am recording my songs in my own little home recording studio. After checking out multiple vids on the Moog Mother 32 I am planing to purchase one for my next recording project. Heard some great patches that could be the basis for a song, also some great sound effects that could perfectly match with my recordings. So my setup will have to be some sort of a swiss army knife, not so much of just one purpose (like focussing on noise etc.). I am very fascinated by the modular world. So most probably I will continue my journey, once I have started. But that will be another project.
For now I am looking for modules that will be a good combination for the mother. So far I have understood that another VCO and VCF, also some effect units should be helpfull. The modules shouldn´t be too difficult to understand or too complex, as I am only just beginning.
Also I will buy the modules step by step, due to financial limitations. This very tiny rack should match with the size of the mother, so that I can put it in the moog tier.
This is what I have been thinking about until now. Are there alternatives? Suggestions for more modules (there is some space left Jens ):
Thanks in advance for all the advice, comments and ideas.
Cheers

Ian Fritz's Threeler : Synthcube has a kit for Eurorack available.

Just bought the superb Delptronics Triggerman from @Soundgoon - extremely quick postage and really nice to deal with!

@stoe had lots of patience with me and sold me a CP909. Obviously recommended!

3) Export owned modules as CSV or similar, which has been requested a while back:

Would also like to see an Excel-compatible spreadsheet of the modules generated from the program.

A CSV export might be possible, I will look into this ...

Any progress?

Unicorns can just add .xml or .json to the end of the URL of a rack.
e.g.
modulargrid.net/e/racks/view/223662
->
modulargrid.net/e/racks/view/223662.xml
modulargrid.net/e/racks/view/223662.json

Not CSV but maybe a useful workaround?

Hey. I need some feedback. The application for this synth is for learning synths, sound and signals.

Rollback: Duplicate out of bounds modules

If you duplicate a rack, all modules outside of the rack (angry cat mode) will be duplicated, too.

I got this at the same time I got a Sputnik 6-channel mixer. The 2hp Mix has superior channel bleed. I sometimes wish they would do 4-8hp because their engineering is on point.

I'm not a Susan! I'm a hundred and five packets of snake oil baby! Eat my eyes you.....

You're so craaaaazy Susan!

What a great rack!! Oh it's mine.

I would watch a lot of videos on Rene first. Especially the ones by Make Noise and James Ciglar.

It's not exactly for everyone but once I got into it I've really enjoyed it. It's a little complex, at least for me, but only because it's different. But I have other ones: the BSP and the Knit Rider by Bastl. Im seriously looking at the Metropolis now by Intelijel.

Yeah, check out the racks I have - a 12u and a skiff . I am building a second 9U in a few weeks, and then hopefully not expanding any more for a while. But then I say that all the time. ;-)

ah yes i've been thinking of getting the Rene myself!

Is it easy to understand or is it a complex sequencer?

I can imagine! ill check your system aswell :) maby i'll get some good idea.... or expensive ones haha!

Hello people, Im new here and new to this modular world of wonders. I have now designed a system here and was wondering if you could help me by telling me if theres anything important missing and if theres some better options for what I already have selected. This would be the first system I could slowly buildup and make changes as I go along, but I just need something to start with, a plan. My main use would be to make ambient and noise stuff for start.

Thanks!

Now available Cwejman ultrarare modules at: http://www.killingtoysroma.com/shop/cwejman-mmf-6/

Hello!

I'm a freelance keyboard playing living in France, and I'm looking to add some modular flexibility to my session/production tools.

My first adventure is a setup that can filter, distort and twist and add delay/rvb, all as clockable as possible. Easily internal clock to precise BPM and easy sync to external midi clock is a must.

My choices in this sketch aren't fixed, more in the line of: I would like a filter here, a preamp here, etc.

Am I overlooking something or is this a reasonable place to start?

Is the 7U (3+1+3) format a good choice?

Thanks for any input!

I also bought Shelves on accident (it was on sale!) so don't feel bad. ;-). I'm sure it's a good module, but it overlaps other stuff I have. I don't have the version with the expanded filter options like you do.

I don't know Yarns but if you are using a computer with this or external sequencer I hear it is very good. I use a Beatstep Pro and a Rene myself. It's all personal choice of course - I don't do live performances. :)

Mutable is very nice stuff - I have Clouds and Braids and thinking of Grids - but I also like the more "raw" tools like Maths, and dedicated VCOs and filters. Anyway - good luck with your choices!

Fransis bandcamp is going to let the people know about the quality of the communication across the world.This http://thewritersdailyword.com/ is improving this environment where the interested people can share their ideas and experiences.

Yes, makes good sense. Was thinking of veils but it's a lot of rack space for 4vca's. I've also neglected drums a bit so I'll go back and have a rethink. Thanks.

This is a Nice One DUDE ;-)

Hey amop!
Good question! Not sure why i got stuck with only MI products. It started with me buying Warps, found out that it was a cross-modulator, a VCA, and a vocoder. So most of the modules are multifunctional, which i feelt was something for me.
Yes its true, i bought shelves on accident haha! Right now i am using it more as a "EQ" , so i patch the full mix from the Frames to shelves and then to the intellijel Out module, but you are right on that point that its just a space Waste right now. I will look in to that.

I was thinking the same! But the Yarns module can send up to 2 diffrent sequences and also a clock signal (in this case im sending the clock signal to the Grids so i can build drum patterns. Its a littlebit of menu diving, but it gets the jobb done haha!

EDITED Apr 30th 2017, 06:19

It's a nice selection but any reason in particular you are using almost exclusively MI equipment? I would mix it up a bit myself. Also, something like Shelves is taking a lot of space and maybe not providing much benefit for your usage.

I would add a sequencer of some kind. Metropolis is a good one though maybe too big here. Or Pam's Workout.

hello all modularheads out there!
im right now thinking of extending my modular system. My main goal is to have something to bring and play live shows on. So something similar to a groovebox would be great.

Right now i have the intellijel 7U case, getting the 1u modules soon next week. with this system i also bought the Roland Aira system 1M so maby in the future i'll get another intellijel case and snap on this build (so in the end it will be a 10/11 U rac)

is it anything you guys think i should add to my system right now? think i've figured out the drum part and the synth parts. Any good input would be really nice. I usally make like electrohouse, industrial music.

thanks!!
//Komrad sebas

recently purchased mixers from @erstlaub. items looked new, service was how you want it and if that wasn't enough the price was keen.

Input module ( and also z-sum4 expander ) , useful and very cheap.
It does its duty -
Unfortunately, shipping is by ordinary mail from Russia.
Too much time !
(To Italy, almost two months)

But I still recommend it